3110-00-227-2807 Needle Roller Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-00-227-2807.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-00-227-2807. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-227-2807
- 품목 이름 코드
- 00051
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 01/01/1961
내부 또는 외부 레이스가 있거나 없이 사용되는 단일 또는 다중 열 감마 베어링으로, 일반적으로 직경이 0.250인치(6.35mm)를 넘지 않는 비교적 작은 크기의 롤러가 특징이며, 일반적으로 직경에 비해 길이가 더 깁니다.
0.7500 inches nominal inner ring width, grease lubrication material, 0.6250 inches nominal bore diameter, mil-g-3278 mil spec single material response lubrication material document and classification, rigid alignment type
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-227-2807 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- rigid
- 보어 직경
- 0.6250 inches nominal
- 내부 링 너비
- 0.7500 inches nominal
- 윤활 재료 문서 및 분류
- mil-g-3278 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.6250 inches nominal
- 전체 외경
- 1.5000 inches nominal
- 재료 문서 및 분류
- mil-s-7420 mil spec 1st material response or 66 fed std 1st material response or mil-s-8690 mil spec 2nd material response or mil-s-7493 mil spec 3rd material response or qq-s-624 fed spec 3rd material response or qq-s-633 fed spec 3rd material response or 66 fed std 4th material response or 66 fed std 5th material response overall
- 재료
- steel comp e52100 or steel comp 8620 or steel or steel comp e50100 or steel comp e51100 overall
- 리테이너 제작 방법
- pressed
- 특별 기능
- oil hole and groove in inner ring
- 표준 허용 오차 지정
- afbma std tolerance for industrial needle bearings
- 스타일 지정자
- cam roller, hardened and ground, non-separable
- 표면 마감
- ground
- 표면 처리
- cadmium exposed surfaces as mounted
- 표면 처리
- chromium outer ring outside diameter
대체합니다
The NSN 3110-00-227-2807 is used in place of the following discontinued or alternate items:
| NSN | 이름 | 날짜 |
|---|---|---|
| 3110-00-157-0625 | No Name Available | 08/01/1980 |
| 3110-00-444-6073 | No Name Available | 06/01/1976 |
| 3110-01-143-1692 | No Name Available | 02/01/1987 |
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 10NBF1224YJ | Needle Roller Bearing |
| 10NBF1224YJ2C | Needle Roller Bearing |
| 10NBF1224YJANG25 | Needle Roller Bearing |
| 24465-10 | Needle Roller Bearing |
| 502-10 | Needle Roller Bearing |
| 713827 | Needle Roller Bearing |
| 7138270 | Needle Roller Bearing |
| A2471 | Needle Roller Bearing |
| AS24465 | Needle Roller Bearing |
| MS24465-10 | Needle Roller Bearing |
| NAS502-10 | Needle Roller Bearing |
| NAS502-10MILG3278 | Needle Roller Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-00-227-2807. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-227-2807?
- The FSCG of the NSN 3110-00-227-2807 is 3110
- Does the NSN 3110-00-227-2807 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482400000
- Does NSN 3110-00-227-2807 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-227-2807 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-227-2807 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-227-2807 was assigned to the Federal Catalog?
- It was assigned 65년 전, on Sun, Jan 1, 1961