3110-00-227-4175 Annular Ball Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-00-227-4175.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-00-227-4175. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-227-4175
- 품목 이름 코드
- 00014
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 01/01/1963
내륜 또는 외륜이 단일 또는 이중 열의 경화 볼 위에서 회전하는 원통형 장치로, 두 링 사이를 쉽게 굴러 마찰을 최소화합니다. 양면 장착을 위해 특수 연삭된 면이 있는 품목은 베어링, 볼, 양면을 참조하십시오. 제외: 베어링, 볼, 기체.
radial load direction, 4.3307 inches nominal bore diameter, 0.0015 inches minimum radial and 0.0025 inches maximum radial and 0.0250 inches maximum axial internal clearance, straight bore shape, 1.8083 inches nominal inner ring width
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-227-4175 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 4.3307 inches nominal
- 보어 모양
- straight
- 내부 링 너비
- 1.8083 inches nominal
- 내부 여유 공간
- 0.0015 inches minimum radial and 0.0025 inches maximum radial and 0.0250 inches maximum axial
- 하중 방향
- radial
- 외부 링 너비
- 1.4961 inches nominal
- 전체 외경
- 7.8740 inches nominal
- 전체 너비
- 1.8083 inches nominal
- 재료
- plastic phenolic retainer
- 재료
- steel ball
- 재료
- steel inner ring
- 재료
- steel outer ring
- 리테이너 제작 방법
- machined
- 특별 기능
- internal clearance measured under a 22 lb load,id and od and adjoiningradit lubrized; puller groove on extended side of inner ring; selected,classified and tested by assy mfr at his plant
- 표준 허용 오차 지정
- abec no.5
- 표면 마감
- ground
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 222S100 | Annular Ball Bearing |
| 466811W13 | Annular Ball Bearing |
| 9451470 | Annular Ball Bearing |
| Q4522AS5313A | Annular Ball Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-00-227-4175. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-227-4175?
- The FSCG of the NSN 3110-00-227-4175 is 3110
- Does the NSN 3110-00-227-4175 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105028
- Does NSN 3110-00-227-4175 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-227-4175 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-227-4175 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-227-4175 was assigned to the Federal Catalog?
- It was assigned 63년 전, on Tue, Jan 1, 1963