REP3F4 Rod End Ball Bearing
포괄적인 명세 및 신청 세부사항: REP3F4 Rod End Ball Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. REP3F4. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- REP3F4
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-232-3216
- 품목 이름 코드
- 00049
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 09/10/1972
특수한 단일 또는 다중 열 볼 베어링으로, 단단하거나 자체 정렬이 가능하며, 단단한 섕크나 중공 섕크로 제작되고, 내부 또는 외부 나사산이 있습니다.
contact bearing seal type, 1.3650 inches minimum and 1.3850 inches maximum length from bore center to shank end, 0.4950 inches minimum and 0.5000 inches maximum inner ring width, self-aligning alignment type, 0.1897 inches minimum bore diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-232-3216 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 베어링 씰 유형
- contact
- 보어 직경
- 0.1897 inches minimum
- 내부 링 너비
- 0.4950 inches minimum and 0.5000 inches maximum
- 보어 중심에서 섕크 끝까지의 길이
- 1.3650 inches minimum and 1.3850 inches maximum
- 윤활 재료 문서 및 분류
- mil-g-81322 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.3180 inches minimum and 0.3380 inches maximum
- 전체 길이
- 1.7455 inches minimum and 1.7855 inches maximum
- 전체 외경
- 0.7710 inches minimum and 0.7910 inches maximum
- 재료 문서 및 분류
- ams 3652 assn std single material response or ams3666 assn std single material response seal
- 재료 문서 및 분류
- mil-s-6758 mil spec single material response outer ring
- 재료 문서 및 분류
- mil-s-6758 mil spec single material response rod end body
- 재료 문서 및 분류
- mil-s-7420 mil spec single material response inner ring
- 재료 문서 및 분류
- mil-s-7420 mil spec single material response ball
- 공칭 나사 크기
- 0.250 inches
- 씰 수량
- 2
- 자체 정렬 위치
- internal
- 섕크 직경
- 0.3650 inches minimum and 0.3850 inches maximum
- 섕크 스타일
- internally threaded w/bead
- 스타일 지정자
- double row, staggered, ball
- 표면 처리 문서 및 분류
- qq-p-416,type 1,class 2 fed spec single treatment response rod end body
- 표면 처리 문서 및 분류
- qq-p-416,type 1,class 2 fed spec single treatment response outer ring
- 표면 처리
- cadmium outer ring
- 표면 처리
- cadmium rod end body
- 스레드 클래스
- 3b
- 나사 방향
- right-hand
- 인치당 실 수량
- 28
- 나사 시리즈 지정자
- unjf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. REP3F4. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-232-3216?
- The FSCG of the NSN 3110-00-232-3216 is 3110
- Does the NSN 3110-00-232-3216 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482800080
- Does NSN 3110-00-232-3216 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-232-3216 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-232-3216 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-232-3216 was assigned to the Federal Catalog?
- It was assigned 53년 전, on Sun, Sep 10, 1972