3110-00-232-3254 Rod End Ball Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-00-232-3254.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-00-232-3254. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-232-3254
- 품목 이름 코드
- 00049
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 09/10/1972
특수한 단일 또는 다중 열 볼 베어링으로, 단단하거나 자체 정렬이 가능하며, 단단한 섕크나 중공 섕크로 제작되고, 내부 또는 외부 나사산이 있습니다.
0.5870 inches minimum and 0.5930 inches maximum inner ring width, self-aligning alignment type, 0.2497 inches minimum and 0.2500 inches maximum bore diameter, contact bearing seal type, 1.8650 inches minimum and 1.8850 inches maximum length from bore center to shank end
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-232-3254 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 베어링 씰 유형
- contact
- 보어 직경
- 0.2497 inches minimum and 0.2500 inches maximum
- 내부 링 너비
- 0.5870 inches minimum and 0.5930 inches maximum
- 보어 중심에서 섕크 끝까지의 길이
- 1.8650 inches minimum and 1.8850 inches maximum
- 윤활 재료 문서 및 분류
- mil-g-81322 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.4280 inches minimum and 0.4480 inches maximum
- 전체 길이
- 2.3240 inches minimum and 2.3640 inches maximum
- 전체 외경
- 0.9280 inches minimum and 0.9480 inches maximum
- 재료 문서 및 분류
- ams 3652 assn std single material response or ams 3666 assn std single material response seal
- 재료 문서 및 분류
- mil-s-6758 mil spec single material response outer ring
- 재료 문서 및 분류
- mil-s-6758 mil spec single material response shaft
- 재료 문서 및 분류
- mil-s-7420 mil spec single material response inner ring
- 재료 문서 및 분류
- mil-s-7420 mil spec single material response ball
- 재료
- plastic polytetrafluoroethylene seal
- 재료
- steel comp 4130 outer ring
- 재료
- steel comp 4130 shaft
- 재료
- steel comp e52100 ball
- 재료
- steel comp e52100 inner ring
- 공칭 나사 크기
- 0.437 inches
- 씰 수량
- 2
- 자체 정렬 각도
- 10.00 degrees nominal
- 자체 정렬 위치
- internal
- 섕크 직경
- 0.6150 inches minimum and 0.6350 inches maximum
- 섕크 스타일
- internally threaded
- 섕크 나사산 길이
- 1.0940 inches minimum and 1.1560 inches maximum
- 스타일 지정자
- double row, staggered, ball
- 스레드 클래스
- 3b
- 나사 방향
- right-hand
- 인치당 실 수량
- 20
- 나사 시리즈 지정자
- unjf
대체합니다
The NSN 3110-00-232-3254 is used in place of the following discontinued or alternate items:
| NSN | 이름 | 날짜 |
|---|---|---|
| 3110-01-134-9170 | No Name Available | 12/01/1990 |
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 4015062 | Rod End Ball Bearing |
| MS21153-8 | Rod End Ball Bearing |
| REP4F7-8F | Rod End Ball Bearing |
| REP4F7FS464 | Rod End Ball Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-00-232-3254. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-232-3254?
- The FSCG of the NSN 3110-00-232-3254 is 3110
- Does the NSN 3110-00-232-3254 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482800080
- Does NSN 3110-00-232-3254 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-232-3254 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3110-00-232-3254 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-232-3254 was assigned to the Federal Catalog?
- It was assigned 53년 전, on Sun, Sep 10, 1972