3110-00-232-3329 Rod End Ball Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-00-232-3329.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-00-232-3329. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-232-3329
- 품목 이름 코드
- 00049
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 09/10/1972
특수한 단일 또는 다중 열 볼 베어링으로, 단단하거나 자체 정렬이 가능하며, 단단한 섕크나 중공 섕크로 제작되고, 내부 또는 외부 나사산이 있습니다.
0.3122 inches minimum and 0.3125 inches maximum bore diameter, 0.8650 inches minimum and 0.8700 inches maximum inner ring width, 2.4280 inches minimum and 2.4480 inches maximum length from bore center to shank end, self-aligning alignment type, contact bearing seal type
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-232-3329 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 베어링 씰 유형
- contact
- 보어 직경
- 0.3122 inches minimum and 0.3125 inches maximum
- 내부 링 너비
- 0.8650 inches minimum and 0.8700 inches maximum
- 보어 중심에서 섕크 끝까지의 길이
- 2.4280 inches minimum and 2.4480 inches maximum
- 윤활 재료 문서 및 분류
- mil-g-81322 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.6460 inches minimum and 0.6660 inches maximum
- 전체 길이
- 3.0480 inches minimum and 3.0780 inches maximum
- 전체 외경
- 1.2400 inches minimum and 1.2600 inches maximum
- 재료 문서 및 분류
- ams 3652 assn std single material response or ams 3666 assn std single material response seal
- 재료 문서 및 분류
- mil-s-6758 mil spec single material response outer ring
- 재료 문서 및 분류
- mil-s-6758 mil spec single material response shaft
- 재료 문서 및 분류
- mil-s-7420 mil spec single material response inner ring
- 재료 문서 및 분류
- mil-s-7420 mil spec single material response ball
- 재료
- plastic polytetrafluoroethylene seal
- 재료
- steel comp 4130 outer ring
- 재료
- steel comp 4130 shaft
- 재료
- steel comp e52100 ball
- 재료
- steel comp e52100 inner ring
- 공칭 나사 크기
- 0.437 inches
- 씰 수량
- 2
- 자체 정렬 각도
- 10.00 degrees nominal
- 자체 정렬 위치
- internal
- 섕크 직경
- 0.4375 inches nominal
- 섕크 나사산 길이
- 1.5320 inches minimum and 1.5940 inches maximum
- 섕크 스타일
- externally threaded
- 스타일 지정자
- double row, staggered, ball
- 표면 처리 문서 및 분류
- qq-p-416,ty 1,cl 2 fed spec single treatment response outer ring
- 표면 처리 문서 및 분류
- qq-p-416,ty 1,cl 2 fed spec single treatment response rod end body
- 표면 처리
- cadmium outer ring
- 표면 처리
- cadmium rod end body
- 스레드 클래스
- 3a
- 나사 방향
- right-hand
- 인치당 실 수량
- 20
- 나사 시리즈 지정자
- unjf
대체합니다
The NSN 3110-00-232-3329 is used in place of the following discontinued or alternate items:
| NSN | 이름 | 날짜 |
|---|---|---|
| 3110-00-488-3916 | No Name Available | 02/01/1981 |
| 3110-01-036-8763 | No Name Available | 02/01/2003 |
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| MS21151-11 | Rod End Ball Bearing |
| MS21151-11G | Rod End Ball Bearing |
| REP5M7 | Rod End Ball Bearing |
| REP5M7 FS424. | Rod End Ball Bearing |
| REP5M7 FS428 | Rod End Ball Bearing |
| REP5M7-11 | Rod End Ball Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-00-232-3329. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-232-3329?
- The FSCG of the NSN 3110-00-232-3329 is 3110
- Does the NSN 3110-00-232-3329 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482800080
- Does NSN 3110-00-232-3329 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-232-3329 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3110-00-232-3329 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-232-3329 was assigned to the Federal Catalog?
- It was assigned 53년 전, on Sun, Sep 10, 1972