What is the FSCG of the NSN 3110-00-236-3695?

The FSCG of the NSN 3110-00-236-3695 is 3110

Does the NSN 3110-00-236-3695 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105008

Does NSN 3110-00-236-3695 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-236-3695 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-236-3695 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-236-3695 was assigned to the Federal Catalog?

It was assigned 55년 전, on Wed, Jun 25, 1969

A3827 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. A3827. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: A3827
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-00-236-3695
품목 이름 코드: 00019
연방 품목 식별 가이드: A044A0
배정 날짜: 06/25/1969

축 방향 추력에 저항하거나 축 방향 하중을 지지하도록 설계된 볼 구름 요소를 갖는 감마 베어링. 베어링, 볼, 피벗은 제외됩니다.

qq-w-409 fed spec single material response overall material document and classification, 1.5520 inches minimum and 1.5720 inches maximum bore diameter, 3.3420 inches minimum and 3.3440 inches maximum overall outside diameter, rigid alignment type, 0.9310 inches minimum and 0.9450 inches maximum overall height

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-236-3695 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

정렬 유형: rigid
보어 직경: 1.5520 inches minimum and 1.5720 inches maximum
전체 높이: 0.9310 inches minimum and 0.9450 inches maximum
전체 외경: 3.3420 inches minimum and 3.3440 inches maximum
재료 문서 및 분류: qq-w-409 fed spec single material response overall
재료: steel comp 1018 overall
리테이너 제작 방법: pressed
특별 기능: inside small bore corner 0.277 in. by 25 deg bevel,large bore race 2.115 in. min. to 2.135 in. max dia.
스타일 지정자: clutch release, thrust, lubricated and sealed
표면 마감: ground
추력 방향 기능 지정: single

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. A3827. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-00-236-3695?: The FSCG of the NSN 3110-00-236-3695 is 3110

Does the NSN 3110-00-236-3695 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3110-00-236-3695 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-236-3695 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-236-3695 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.