3110-00-252-8050 Annular Ball Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-00-252-8050.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-00-252-8050. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-252-8050
- 품목 이름 코드
- 00014
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 06/18/1973
내륜 또는 외륜이 단일 또는 이중 열의 경화 볼 위에서 회전하는 원통형 장치로, 두 링 사이를 쉽게 굴러 마찰을 최소화합니다. 양면 장착을 위해 특수 연삭된 면이 있는 품목은 베어링, 볼, 양면을 참조하십시오. 제외: 베어링, 볼, 기체.
radial load direction, contact bearing seal type, standard internal fit-up designation, 6.00 millimeters nominal bore diameter, straight bore shape
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-252-8050 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 베어링 씰 유형
- contact
- 보어 직경
- 6.00 millimeters nominal
- 보어 모양
- straight
- 내부 장착 지정
- standard
- 하중 방향
- radial
- 윤활재
- grease
- 윤활 재료 문서 및 분류
- andok c,fscm 29700 mfr ref single material response
- 전체 외경
- 19.00 millimeters nominal
- 전체 너비
- 6.0 millimeters nominal
- 재료 문서 및 분류
- 66 fed std single material response ball
- 재료 문서 및 분류
- 66 fed std single material response inner ring
- 재료 문서 및 분류
- 66 fed std single material response outer ring
- 재료
- rubber synthetic seal
- 재료
- steel retainer
- 재료
- steel comp e52100 ball
- 재료
- steel comp e52100 inner ring
- 재료
- steel comp e52100 outer ring
- 참조 번호 차별화 특성
- as differentiated by material which must conform to ships parts control center special quality control provisions
- 리테이너 제작 방법
- pressed
- 씰 수량
- 2
- 특별 테스트 기능
- special quality control testing
- 표준 허용 오차 지정
- abec no.1
- 스타일 지정자
- non-loading groove, non-separable
- 표면 마감
- ground
- 테스트 데이터 문서
- "81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| Z99036XR1C | Annular Ball Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-00-252-8050. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-252-8050?
- The FSCG of the NSN 3110-00-252-8050 is 3110
- Does the NSN 3110-00-252-8050 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105028
- Does NSN 3110-00-252-8050 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-252-8050 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-252-8050 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-252-8050 was assigned to the Federal Catalog?
- It was assigned 53년 전, on Mon, Jun 18, 1973