MR4E Rod End Roller Bearing
포괄적인 명세 및 신청 세부사항: MR4E Rod End Roller Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. MR4E. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- MR4E
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-278-6734
- 품목 이름 코드
- 00050
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 01/01/1963
특수한 단일 또는 다중 열 롤러 베어링으로, 단단하거나 자체 정렬이 가능하며, 내부 나사산, 일반 중공, 메일 나사산 또는 단단한 섕크로 제작됩니다.
2.2500 inches nominal length from bore center to shank end, 0.5000 inches nominal inner ring width, self-aligning alignment type, contact bearing seal type, 0.2500 inches nominal bore diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-278-6734 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 베어링 씰 유형
- contact
- 보어 직경
- 0.2500 inches nominal
- 내부 링 너비
- 0.5000 inches nominal
- 보어 중심에서 섕크 끝까지의 길이
- 2.2500 inches nominal
- 윤활 재료 문서 및 분류
- mil-g-23827 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.3600 inches nominal
- 전체 길이
- 2.7900 inches nominal
- 전체 외경
- 1.0800 inches nominal
- 재료
- rubber synthetic seal
- 재료
- steel inner ring
- 재료
- steel outer ring
- 재료
- steel roller
- 재료
- steel shaft
- 공칭 나사 크기
- 0.625 inches
- 씰 수량
- 2
- 자체 정렬 각도
- 10.00 degrees nominal
- 자체 정렬 위치
- internal
- 섕크 직경
- 0.6250 inches nominal
- 섕크 나사산 길이
- 1.3750 inches nominal
- 섕크 스타일
- externally threaded
- 특별 기능
- with grease fitting
- 스타일 지정자
- single row, concave rollers
- 표면 처리
- cadmium all external/exposed metal surfaces
- 스레드 클래스
- 3a
- 나사 방향
- right-hand
- 인치당 실 수량
- 18
- 나사 시리즈 지정자
- unjf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. MR4E. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-278-6734?
- The FSCG of the NSN 3110-00-278-6734 is 3110
- Does the NSN 3110-00-278-6734 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482500000
- Does NSN 3110-00-278-6734 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-278-6734 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-278-6734 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-278-6734 was assigned to the Federal Catalog?
- It was assigned 63년 전, on Tue, Jan 1, 1963