SM4-6T-21 Rod End Roller Bearing
포괄적인 명세 및 신청 세부사항: SM4-6T-21 Rod End Roller Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. SM4-6T-21. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- SM4-6T-21
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-00-726-7964
- 품목 이름 코드
- 00050
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 01/01/1963
특수한 단일 또는 다중 열 롤러 베어링으로, 단단하거나 자체 정렬이 가능하며, 내부 나사산, 일반 중공, 메일 나사산 또는 단단한 섕크로 제작됩니다.
1.8400 inches nominal length from bore center to shank end, self-aligning alignment type, 0.5000 inches nominal inner ring width, 0.2500 inches nominal bore diameter, contact bearing seal type
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-726-7964 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 베어링 씰 유형
- contact
- 보어 직경
- 0.2500 inches nominal
- 내부 링 너비
- 0.5000 inches nominal
- 보어 중심에서 섕크 끝까지의 길이
- 1.8400 inches nominal
- 윤활 재료 문서 및 분류
- mil-g-23827 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.3600 inches nominal
- 전체 길이
- 2.3800 inches nominal
- 전체 외경
- 1.0800 inches nominal
- 재료
- rubber synthetic seal
- 재료
- steel inner ring
- 재료
- steel outer ring
- 재료
- steel roller
- 재료
- steel shaft
- 공칭 나사 크기
- 0.375 inches
- 씰 수량
- 2
- 자체 정렬 각도
- 10.00 degrees nominal
- 자체 정렬 위치
- internal
- 섕크 직경
- 0.3750 inches nominal
- 섕크 스타일
- externally threaded
- 섕크 나사산 길이
- 1.0000 inches nominal
- 특별 기능
- 0.0640 in. min to 0.0690 in. max deep by 0.0930 in. min by 0.0980 in. max w by 1.0000 in. lg slot in threaded shank,with grease fittings
- 스타일 지정자
- single row, concave rollers
- 표면 처리
- cadmium all external/exposed metal surfaces
- 스레드 클래스
- 3a
- 나사 방향
- right-hand
- 인치당 실 수량
- 24
- 나사 시리즈 지정자
- unjf
대체합니다
The NSN 3110-00-726-7964 is used in place of the following discontinued or alternate items:
| NSN | 이름 | 날짜 |
|---|---|---|
| 3110-00-555-6707 | No Name Available | 01/01/1960 |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. SM4-6T-21. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-00-726-7964?
- The FSCG of the NSN 3110-00-726-7964 is 3110
- Does the NSN 3110-00-726-7964 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482500000
- Does NSN 3110-00-726-7964 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-726-7964 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3110-00-726-7964 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-726-7964 was assigned to the Federal Catalog?
- It was assigned 63년 전, on Tue, Jan 1, 1963