55950 Airframe Ball Bearing

포괄적인 명세 및 신청 세부사항: 55950 Airframe Ball Bearing.

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. 55950. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호
55950
연방 공급 분류
3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호
3110-00-932-5599
품목 이름 코드
00041
연방 품목 식별 가이드
A044A0
배정 날짜
02/20/1967

내륜 또는 외륜이 경화된 볼(ball) 열 위에서 회전하는 원통형 제품으로, 베어링은 궤도를 따라 굴러 마찰을 최소화합니다. 이러한 제품은 부식되지 않는 특성, 가벼운 무게, 미터법 대신 인치 단위의 치수, 일반적으로 외륜의 면 밖으로 돌출된 내륜, 또는 내경이 내경보다 약간 큰 매우 좁은 폭의 내륜을 특징으로 합니다. 주로 항공기 조립품(예: 제어 시스템 및 항공기 표면)에 사용하도록 설계되었습니다. 제외 대상: 베어링, 볼, 환형.

mil-g-23827 mil spec single material response lubrication material document and classification, 0.4995 inches minimum and 0.5000 inches maximum bore diameter, 0.6150 inches minimum and 0.6200 inches maximum inner ring width, contact bearing seal type, radial load direction

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-00-932-5599 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

베어링 씰 유형
contact
보어 직경
0.4995 inches minimum and 0.5000 inches maximum
내부 링 너비
0.6150 inches minimum and 0.6200 inches maximum
하중 방향
radial
윤활 재료 문서 및 분류
mil-g-23827 mil spec single material response
윤활재
grease
외부 링 너비
0.4950 inches minimum and 0.5000 inches maximum
전체 외경
1.6870 inches minimum and 1.6875 inches maximum
재료 문서 및 분류
66 fed std all material responses ball
재료 문서 및 분류
66 fed std single material response inner ring
재료 문서 및 분류
66 fed std single material response outer ring
재료
rubber synthetic seal
재료
steel comp e51100 or steel comp e52100 ball
재료
steel comp e52100 inner ring
재료
steel comp e52100 outer ring
씰 수량
2
표준 허용 오차 지정
afbma std tolerance for airframe ball bearings
스타일 지정자
single row inner ring extended both sides
표면 처리
cadmium all external/exposed metal surfaces

대체합니다

The NSN 3110-00-932-5599 is used in place of the following discontinued or alternate items:

NSN 이름 날짜
3110-00-142-4474 No Name Available 02/19/1968

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 55950. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-00-932-5599?
The FSCG of the NSN 3110-00-932-5599 is 3110
Does the NSN 3110-00-932-5599 have a Schedule B code assigned?
Yes, the Schedule B code is 8482105068
Does NSN 3110-00-932-5599 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3110-00-932-5599 contain precious materials?
Precious metal content is unknown
Does NSN 3110-00-932-5599 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3110-00-932-5599 was assigned to the Federal Catalog?
It was assigned 59년 전, on Mon, Feb 20, 1967

가격 및 재고

베어링의 가격 및 재고 정보를 알아보려면 양식을 작성하세요. 55950

인기 베어링

수요가 많고 성능이 뛰어난 베어링을 살펴보세요.

550923
3110-01-013-5515
Bearing
550924
3110-01-013-5513
Bearing
550929
3110-01-023-1842
Tapered Roller Bearing Cup
550930
3110-01-021-1919
Tapered Roller Cone and Rollers
550930PC19
3120-00-489-3985
Sleeve Bearing
550941-2
3110-01-014-6770
Bearing Retainer
550963
3120-01-278-7681
Sleeve Bushing
550964-1
3120-00-505-0805
Linear-Rotary Motion Roller
550964-2
3120-00-505-0806
Linear-Rotary Motion Roller
550964-3
3120-00-539-9567
Linear-Rotary Motion Roller
550970-1
3120-00-505-0803
Sleeve Bushing
550976-2
3120-01-014-6788
Support Bearing
5509920025
3120-01-201-0329
Sleeve Bushing
550B-34
3120-01-303-6305
Sleeve Bearing
550B-35
3120-01-303-6306
Sleeve Bearing