3TKCGDD12-19P Airframe Ball Bearing
포괄적인 명세 및 신청 세부사항: 3TKCGDD12-19P Airframe Ball Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3TKCGDD12-19P. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 3TKCGDD12-19P
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-01-004-5070
- 품목 이름 코드
- 00041
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 06/10/1975
내륜 또는 외륜이 경화된 볼(ball) 열 위에서 회전하는 원통형 제품으로, 베어링은 궤도를 따라 굴러 마찰을 최소화합니다. 이러한 제품은 부식되지 않는 특성, 가벼운 무게, 미터법 대신 인치 단위의 치수, 일반적으로 외륜의 면 밖으로 돌출된 내륜, 또는 내경이 내경보다 약간 큰 매우 좁은 폭의 내륜을 특징으로 합니다. 주로 항공기 조립품(예: 제어 시스템 및 항공기 표면)에 사용하도록 설계되었습니다. 제외 대상: 베어링, 볼, 환형.
radial load direction, 0.2760 inches minimum and 0.2810 inches maximum inner ring width, mil-g-23827 mil spec single material response lubrication material document and classification, 0.7498 inches minimum and 0.7502 inches maximum bore diameter, grease lubrication material
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-004-5070 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.7498 inches minimum and 0.7502 inches maximum
- 내부 링 너비
- 0.2760 inches minimum and 0.2810 inches maximum
- 하중 방향
- radial
- 윤활 재료 문서 및 분류
- mil-g-23827 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.2450 inches minimum and 0.2500 inches maximum
- 전체 외경
- 1.1870 inches minimum and 1.1875 inches maximum
- 재료
- plastic polytetrafluoroethylene separator slug
- 재료
- steel comp 440a inner ring
- 재료
- steel comp 440a outer ring
- 재료
- steel comp 440a ball
- 재료
- steel comp 440a shield
- 방패 수량
- 2
- 특별 기능
- separator slug impregnated with molybdenum disulfide
- 스타일 지정자
- single row inner ring extended both sides
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3TKCGDD12-19P. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-01-004-5070?
- The FSCG of the NSN 3110-01-004-5070 is 3110
- Does the NSN 3110-01-004-5070 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105068
- Does NSN 3110-01-004-5070 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3110-01-004-5070 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-01-004-5070 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-01-004-5070 was assigned to the Federal Catalog?
- It was assigned 51년 전, on Tue, Jun 10, 1975