3110-01-024-8524 Rod End Roller Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-01-024-8524.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-01-024-8524. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-01-024-8524
- 품목 이름 코드
- 00050
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 07/21/1976
특수한 단일 또는 다중 열 롤러 베어링으로, 단단하거나 자체 정렬이 가능하며, 내부 나사산, 일반 중공, 메일 나사산 또는 단단한 섕크로 제작됩니다.
self-aligning alignment type, contact bearing seal type, 2.3950 inches minimum and 2.4250 inches maximum length from bore center to shank end, 0.6820 inches minimum and 0.6870 inches maximum inner ring width, 0.3120 inches minimum and 0.3125 inches maximum bore diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-024-8524 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 베어링 씰 유형
- contact
- 보어 직경
- 0.3120 inches minimum and 0.3125 inches maximum
- 내부 링 너비
- 0.6820 inches minimum and 0.6870 inches maximum
- 보어 중심에서 섕크 끝까지의 길이
- 2.3950 inches minimum and 2.4250 inches maximum
- 윤활 재료 문서 및 분류
- mil-g-23827 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.4450 inches minimum and 0.4600 inches maximum
- 전체 길이
- 3.7850 inches minimum and 3.8050 inches maximum
- 전체 외경
- 1.3600 inches minimum and 1.4100 inches maximum
- 재료 문서 및 분류
- mil-s-7420 mil spec single material response inner ring
- 재료 문서 및 분류
- mil-s-7493 mil spec single material response rod end body
- 재료 문서 및 분류
- mil-s-7493 mil spec single material response roller
- 재료 문서 및 분류
- qq-s-763 fed spec single material response shield
- 재료
- plastic phenolic seal
- 재료
- steel comp 430 shield
- 재료
- steel comp 4620 rod end body
- 재료
- steel comp e52100 inner ring
- 재료
- steel comp e52100 roller
- 공칭 나사 크기
- 0.500 inches
- 씰 수량
- 2
- 자체 정렬 각도
- 10.00 degrees nominal
- 자체 정렬 위치
- internal
- 섕크 직경
- 0.5000 inches maximum
- 섕크 스타일
- externally threaded
- 섕크 나사산 길이
- 1.3100 inches minimum and 1.3700 inches maximum
- 방패 수량
- 3
- 특별 기능
- internal clearance 0.0002 in. min 0.0010 in. max,keyway 0.1290 in. max wide by 0.0860 in. max deep center line of shank extending 1.3600 in. max from center of bore with 1.0000 in. radius,nas 516 grease fitting in head
- 스타일 지정자
- single row, concave rollers
- 표면 처리 문서 및 분류
- qq-p-416,ty 1,cl 2 fed spec single treatment response all external/exposed metal surfaces
- 표면 처리
- cadmium all external/exposed metal surfaces
- 스레드 클래스
- 3a
- 나사 방향
- right-hand
- 인치당 실 수량
- 20
- 나사 시리즈 지정자
- unjf
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| BACB10C123H | Rod End Roller Bearing |
| MR5AH | Rod End Roller Bearing |
| SM5-8C1-502 | Rod End Roller Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-01-024-8524. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-01-024-8524?
- The FSCG of the NSN 3110-01-024-8524 is 3110
- Does the NSN 3110-01-024-8524 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482500000
- Does NSN 3110-01-024-8524 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-01-024-8524 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-01-024-8524 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-01-024-8524 was assigned to the Federal Catalog?
- It was assigned 50년 전, on Wed, Jul 21, 1976