6889093 Annular Ball Bearing

포괄적인 명세 및 신청 세부사항: 6889093 Annular Ball Bearing.

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. 6889093. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호
6889093
연방 공급 분류
3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호
3110-01-044-4471
품목 이름 코드
00014
연방 품목 식별 가이드
A044A0
배정 날짜
07/13/1977

내륜 또는 외륜이 단일 또는 이중 열의 경화 볼 위에서 회전하는 원통형 장치로, 두 링 사이를 쉽게 굴러 마찰을 최소화합니다. 양면 장착을 위해 특수 연삭된 면이 있는 품목은 베어링, 볼, 양면을 참조하십시오. 제외: 베어링, 볼, 기체.

18.5 degrees nominal contact angle, 30.0 millimeters nominal bore diameter, 0.0014 inches minimum radial and 0.0018 inches maximum radial internal clearance, straight bore shape, 16.0 millimeters nominal inner ring width

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-044-4471 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

보어 직경
30.0 millimeters nominal
보어 모양
straight
접촉각
18.5 degrees nominal
내부 링 너비
16.0 millimeters nominal
내부 여유 공간
0.0014 inches minimum radial and 0.0018 inches maximum radial
내부 맞춤 접촉 각도 방향
primarily radial
하중 방향
angular
윤활 재료 문서 및 분류
mil-c-11796 mil spec single material response
윤활재
lubricant
외부 링 너비
13.0 millimeters nominal
전체 외경
55.0 millimeters nominal
재료 문서 및 분류
ams 6415 assn std single material response separator
재료 문서 및 분류
ams 6490 assn std single material response ball
재료 문서 및 분류
ams 6490 assn std single material response inner ring
재료 문서 및 분류
ams 6490 assn std single material response outer ring
재료
steel comp 4340 separator
재료
steel comp m50 ball
재료
steel comp m50 inner ring
재료
steel comp m50 outer ring
귀중한 자료 및 위치
separator silver
귀중한 재료
silver
리테이너 제작 방법
machined
표준 허용 오차 지정
abec no.5
특별 기능
puller groove located on inner ring
스타일 지정자
non-loading groove, non-separable
표면 마감
ground
테스트 데이터 문서
73342-6889093 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 6889093. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-01-044-4471?
The FSCG of the NSN 3110-01-044-4471 is 3110
Does the NSN 3110-01-044-4471 have a Schedule B code assigned?
Yes, the Schedule B code is 8482105028
Does NSN 3110-01-044-4471 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3110-01-044-4471 contain precious materials?
Item contains silver.
Does NSN 3110-01-044-4471 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3110-01-044-4471 was assigned to the Federal Catalog?
It was assigned 49년 전, on Wed, Jul 13, 1977

가격 및 재고

베어링의 가격 및 재고 정보를 알아보려면 양식을 작성하세요. 6889093

인기 베어링

수요가 많고 성능이 뛰어난 베어링을 살펴보세요.

23KP107
3120-01-455-2895
Sleeve Bearing Half Set
23KP112
3110-01-523-5967
Thrust Ball Bearing
23KP115
3110-01-521-4497
Bearing Retaining Plate
23KP138
3120-01-361-1158
Sleeve Bearing Half
23KP139
3120-01-361-1159
Sleeve Bearing Half
23KP140
3120-01-361-1157
Sleeve Bearing Half
23KP141
3120-01-361-3151
Sleeve Bearing Half
23KP188
3120-01-350-6845
Sleeve Bushing
23KP201
3120-01-570-5756
Thrust Washer Bearing
23KP206
3120-01-521-4500
Sleeve Bearing
23KP216
3120-01-360-5288
Sleeve Bearing
23KP221
3120-01-569-8868
Thrust Washer Bearing
23KP222
3120-01-569-8872
Thrust Washer Bearing
23KP223
3120-01-570-0019
Thrust Washer Bearing
23KP224
3120-01-568-9040
Thrust Washer Bearing