What is the FSCG of the NSN 3110-01-048-2664?

The FSCG of the NSN 3110-01-048-2664 is 3110

Does the NSN 3110-01-048-2664 have a Schedule B code assigned?

Yes, the Schedule B code is 8482400000

Does NSN 3110-01-048-2664 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-048-2664 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-048-2664 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-048-2664 was assigned to the Federal Catalog?

It was assigned 47년 전, on Thu, Sep 22, 1977

BACB10B216CF7 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. BACB10B216CF7. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: BACB10B216CF7
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-01-048-2664
품목 이름 코드: 00040
연방 품목 식별 가이드: A044A0
배정 날짜: 09/22/1977

캠과 롤링 접촉을 하고 왕복 또는 진동 운동을 선형 운동으로 변환하는 데 사용되는 롤러와 스터드로 구성된 조립체입니다.

mil-s-7420 mil spec single material response stud material document and classification, 0.7490 inches minimum and 0.7510 inches maximum overall outside diameter, 66 fed std all material responses or aisi assn std all material responses or mil-s-7420 mil spec 1st material response roller material document and classification, 0.3390 inches minimum and 0.3440 inches maximum outer ring width, 1.2034 inches minimum and 1.2654 inches maximum overall length

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-048-2664 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

외부 링 너비: 0.3390 inches minimum and 0.3440 inches maximum
전체 길이: 1.2034 inches minimum and 1.2654 inches maximum
전체 외경: 0.7490 inches minimum and 0.7510 inches maximum
재료 문서 및 분류: 66 fed std all material responses or aisi assn std all material responses or mil-s-7420 mil spec 1st material response roller
재료 문서 및 분류: mil-s-7420 mil spec single material response stud
재료 문서 및 분류: mil-s-7420 mil spec single material response outer ring
재료: steel washer
재료: steel comp e51100 or steel comp e52100 roller
재료: steel comp e52100 outer ring
재료: steel comp e52100 stud
공칭 나사 크기: 0.375 inches
특별 기능: nas516-1 lubricator fitting in flanged end,cotter pin hole in stud end
스터드 직경: 0.3740 inches minimum and 0.3750 inches maximum
스터드 길이: 0.8440 inches minimum and 0.9060 inches maximum
스타일 지정자: cam follower
표면 처리 문서 및 분류: qq-c-320,cl 2 fed spec single treatment response outer race
표면 처리 문서 및 분류: qq-p-416,ty 1cl 2 fed spec single treatment response exposed surfaces of stud and washer as mounted
표면 처리: cadmium exposed surfaces of stud and washer as mounted
표면 처리: chromium outer race
스레드 클래스: 3a
나사 방향: right-hand
나사산 길이: 0.4070 inches minimum and 0.4690 inches maximum
인치당 실 수량: 24
나사 시리즈 지정자: unf

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. BACB10B216CF7. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-01-048-2664?: The FSCG of the NSN 3110-01-048-2664 is 3110

Does the NSN 3110-01-048-2664 have a Schedule B code assigned?: Yes, the Schedule B code is 8482400000

Does NSN 3110-01-048-2664 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-048-2664 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-048-2664 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.