3110-01-064-4128 Rod End Roller Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-01-064-4128.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-01-064-4128. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-01-064-4128
- 품목 이름 코드
- 00050
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 08/24/1978
특수한 단일 또는 다중 열 롤러 베어링으로, 단단하거나 자체 정렬이 가능하며, 내부 나사산, 일반 중공, 메일 나사산 또는 단단한 섕크로 제작됩니다.
0.2495 inches minimum and 0.2500 inches maximum bore diameter, 0.4950 inches minimum and 0.5000 inches maximum inner ring width, contact bearing seal type, self-aligning alignment type, 1.8250 inches minimum and 1.8550 inches maximum length from bore center to shank end
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-064-4128 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 정렬 유형
- self-aligning
- 베어링 씰 유형
- contact
- 보어 직경
- 0.2495 inches minimum and 0.2500 inches maximum
- 내부 링 너비
- 0.4950 inches minimum and 0.5000 inches maximum
- 보어 중심에서 섕크 끝까지의 길이
- 1.8250 inches minimum and 1.8550 inches maximum
- 윤활 재료 문서 및 분류
- mil-g-23827 mil spec single material response
- 윤활재
- grease
- 외부 링 너비
- 0.3600 inches maximum
- 전체 길이
- 2.3400 inches minimum and 2.3950 inches maximum
- 전체 외경
- 1.0300 inches minimum and 1.0800 inches maximum
- 재료 문서 및 분류
- 66 fed std single material response shield
- 재료 문서 및 분류
- mil-s-7420 mil spec single material response inner ring
- 재료 문서 및 분류
- mil-s-7420 mil spec single material response roller
- 재료 문서 및 분류
- mil-s-7493 mil spec single material response rod end body
- 재료
- rubber butadiene-acrylonitrile class nbr and cotton seal
- 재료
- steel comp 430 shield
- 재료
- steel comp 4620 rod end body
- 재료
- steel snap ring
- 재료
- steel comp e52100 inner ring
- 재료
- steel comp e52100 roller
- 공칭 나사 크기
- 0.375 inches
- 씰 수량
- 2
- 자체 정렬 각도
- 10.00 degrees nominal
- 자체 정렬 위치
- internal
- 섕크 직경
- 0.3750 inches nominal
- 섕크 스타일
- externally threaded
- 섕크 나사산 길이
- 1.0000 inches minimum
- 방패 수량
- 2
- 특별 기능
- two nas 516-1 grease fittings on opposite side of rod end body,radial clearance 0.0002 in. min 0.0010 in. max
- 스타일 지정자
- single row, concave rollers
- 표면 처리 문서 및 분류
- qq-p-416,ty 1,cl 2 fed spec single treatment response all external/exposed metal surfaces
- 표면 처리
- cadmium all external/exposed metal surfaces
- 스레드 클래스
- 3a
- 나사 방향
- right-hand
- 인치당 실 수량
- 24
- 나사 시리즈 지정자
- unjf
대체합니다
The NSN 3110-01-064-4128 is used in place of the following discontinued or alternate items:
| NSN | 이름 | 날짜 |
|---|---|---|
| 3110-00-541-0061 | No Name Available | 08/01/1986 |
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-01-064-4128. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-01-064-4128?
- The FSCG of the NSN 3110-01-064-4128 is 3110
- Does the NSN 3110-01-064-4128 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482500000
- Does NSN 3110-01-064-4128 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3110-01-064-4128 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-01-064-4128 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-01-064-4128 was assigned to the Federal Catalog?
- It was assigned 48년 전, on Thu, Aug 24, 1978