What is the FSCG of the NSN 3110-01-088-2023?

The FSCG of the NSN 3110-01-088-2023 is 3110

Does the NSN 3110-01-088-2023 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105008

Does NSN 3110-01-088-2023 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-088-2023 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-088-2023 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-088-2023 was assigned to the Federal Catalog?

It was assigned 45년 전, on Tue, Jan 8, 1980

A722-802 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. A722-802. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: A722-802
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-01-088-2023
품목 이름 코드: 00019
연방 품목 식별 가이드: A044A0
배정 날짜: 01/08/1980

축 방향 추력에 저항하거나 축 방향 하중을 지지하도록 설계된 볼 구름 요소를 갖는 감마 베어링. 베어링, 볼, 피벗은 제외됩니다.

0.1270 inches nominal bore smallest diameter, 0.1290 inches nominal largest bore diameter, 0.1230 inches minimum and 0.1250 inches maximum overall height, 0.3085 inches minimum and 0.3105 inches maximum overall outside diameter, rigid alignment type

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-088-2023 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

정렬 유형: rigid
보어 최소 직경: 0.1270 inches nominal
가장 큰 보어 직경: 0.1290 inches nominal
전체 높이: 0.1230 inches minimum and 0.1250 inches maximum
전체 외경: 0.3085 inches minimum and 0.3105 inches maximum
재료 문서 및 분류: aisi 440c assn std single material response ball
재료 문서 및 분류: aisi 440c assn std single material response inner ring
재료 문서 및 분류: aisi 440c assn std single material response outer ring
재료 문서 및 분류: ms 5643 assn std single material response retainer
재료: steel comp 440c ball
재료: steel comp 440c outer ring
재료: steel comp 440c inner ring
재료: steel comp 630 retainer
리테이너 제작 방법: machined
표준 허용 오차 지정: abec no.5
특별 기능: ring and balls c56.0 to c64.0 rockwell hardness
스타일 지정자: grooved race surface
표면 마감: ground
테스트 데이터 문서: 73030-599242-3 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
추력 방향 기능 지정: single

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. A722-802. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-01-088-2023?: The FSCG of the NSN 3110-01-088-2023 is 3110

Does the NSN 3110-01-088-2023 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3110-01-088-2023 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-088-2023 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-088-2023 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.