What is the FSCG of the NSN 3110-01-097-4975?

The FSCG of the NSN 3110-01-097-4975 is 3110

Does the NSN 3110-01-097-4975 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-01-097-4975 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-097-4975 contain precious materials?

Precious metal content is unknown

Does NSN 3110-01-097-4975 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-097-4975 was assigned to the Federal Catalog?

It was assigned 44년 전, on Mon, Jul 14, 1980

SR2F7P28L02 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. SR2F7P28L02. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: SR2F7P28L02
연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-01-097-4975
품목 이름 코드: 00014
연방 품목 식별 가이드: A044A0
배정 날짜: 07/14/1980

내륜 또는 외륜이 단일 또는 이중 열의 경화 볼 위에서 회전하는 원통형 장치로, 두 링 사이를 쉽게 굴러 마찰을 최소화합니다. 양면 장착을 위해 특수 연삭된 면이 있는 품목은 베어링, 볼, 양면을 참조하십시오. 제외: 베어링, 볼, 기체.

0.0280 inches minimum and 0.0300 inches maximum flange width, 0.0002 inches minimum radial and 0.0008 inches maximum radial internal clearance, 0.1248 inches minimum and 0.1250 inches maximum bore diameter, straight bore shape, 0.4390 inches minimum and 0.4400 inches maximum flange outside diameter

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-097-4975 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

보어 직경: 0.1248 inches minimum and 0.1250 inches maximum
보어 모양: straight
플랜지 외경: 0.4390 inches minimum and 0.4400 inches maximum
플랜지 폭: 0.0280 inches minimum and 0.0300 inches maximum
내부 여유 공간: 0.0002 inches minimum radial and 0.0008 inches maximum radial
하중 방향: radial
윤활 재료 문서 및 분류: mil-b-197 mil spec single material response
윤활재: lubricant
외륜 외경: 0.3748 inches minimum and 0.3750 inches maximum
전체 너비: 0.1552 inches minimum and 0.1562 inches maximum
재료 문서 및 분류: aisi assn std single material response overall
재료: steel comp 440a overall
리테이너 제작 방법: pressed
표준 허용 오차 지정: abec no.7
특별 기능: stabilized for operation from m65 deg f to p250 deg f,c56.0 to c.64.0 rockwell hardness rings and balls
스타일 지정자: loading groove, non-separable
표면 마감: ground
테스트 데이터 문서: 73030-738048-1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. SR2F7P28L02. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-01-097-4975?: The FSCG of the NSN 3110-01-097-4975 is 3110

Does the NSN 3110-01-097-4975 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-01-097-4975 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-01-097-4975 contain precious materials?: Precious metal content is unknown

Does NSN 3110-01-097-4975 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.