What is the FSCG of the NSN 3110-01-173-3722?

The FSCG of the NSN 3110-01-173-3722 is 3110

Does the NSN 3110-01-173-3722 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105008

Does NSN 3110-01-173-3722 require demilitarization?

Usml or ccl military items - demil required. Item managers,, equipment specialists, or product specialists must furnish special demilinstructions. (note 3).

Does NSN 3110-01-173-3722 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-01-173-3722 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-01-173-3722 was assigned to the Federal Catalog?

It was assigned 41년 전, on Mon, Mar 5, 1984

3110-01-173-3722 | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-01-173-3722. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

연방 공급 분류: 3110 비장착형 마찰 방지 베어링
(NSN) 국가 재고 번호: 3110-01-173-3722
품목 이름 코드: 00019
연방 품목 식별 가이드: A044A0
배정 날짜: 03/05/1984

축 방향 추력에 저항하거나 축 방향 하중을 지지하도록 설계된 볼 구름 요소를 갖는 감마 베어링. 베어링, 볼, 피벗은 제외됩니다.

0.5020 inches minimum and 0.5070 inches maximum bore smallest diameter, zzzy criticality code justification, 0.3650 inches minimum and 0.3750 inches maximum overall height, rigid alignment type, 0.5020 inches minimum and 0.5070 inches maximum largest bore diameter

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-173-3722 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

정렬 유형: rigid
보어 최소 직경: 0.5020 inches minimum and 0.5070 inches maximum
중요도 코드 정당화: zzzy
가장 큰 보어 직경: 0.5020 inches minimum and 0.5070 inches maximum
전체 높이: 0.3650 inches minimum and 0.3750 inches maximum
전체 외경: 0.8700 inches minimum and 0.8750 inches maximum
재료: plastic polyamide (nylon) retainer
재료: steel corrosion resisting ball
재료: steel washer
참조 번호 차별화 특성: as differentiated by material which must conform to ships parts control center special quality control provisions and certified free from mercury contamination
리테이너 제작 방법: machined
특별 테스트 기능: special quality control testing
스타일 지정자: flat race surface, in line ball retainer
표면 마감: ground
테스트 데이터 문서: "81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
추력 방향 기능 지정: single

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-01-173-3722. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3110-01-173-3722?: The FSCG of the NSN 3110-01-173-3722 is 3110

Does the NSN 3110-01-173-3722 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105008

Does NSN 3110-01-173-3722 require demilitarization?: Usml or ccl military items - demil required. Item managers,, equipment specialists, or product specialists must furnish special demilinstructions. (note 3).

Does NSN 3110-01-173-3722 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-01-173-3722 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.