13084578 Duplex Ball Bearing
포괄적인 명세 및 신청 세부사항: 13084578 Duplex Ball Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 13084578. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 13084578
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-01-181-0844
- 품목 이름 코드
- 30213
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 06/06/1984
치수적으로 선택된 두 개의 단열 환형 볼 베어링이 한 쌍 또는 세트로 구성됩니다. 링 면은 특정 오프셋으로 특수 연삭되어 장착 시 미리 정해진 예압을 생성합니다. 이중 장착을 위해 특수 연삭된 면을 가진 단열 앵귤러 콘택트 베어링이 포함될 수 있습니다.
0.2498 inches minimum and 0.2500 inches maximum bore diameter, 13.0 degrees nominal contact angle, standard internal fit-up designation, 2.0 pounds minimum and 3.0 pounds maximum bearing preload rating, angular load direction
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-181-0844 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 베어링 예압 정격
- 2.0 pounds minimum and 3.0 pounds maximum
- 보어 직경
- 0.2498 inches minimum and 0.2500 inches maximum
- 접촉각
- 13.0 degrees nominal
- 내부 장착 지정
- standard
- 하중 방향
- angular
- 윤활 재료 문서 및 분류
- xrl 743a,fscm 19135 mfr ref single material response
- 전체 외경
- 0.4998 inches minimum and 0.5000 inches maximum
- 전체 너비
- 1.5750 inches minimum and 1.5850 inches maximum
- 재료 문서 및 분류
- unable to decode
- 재료
- unable to decode
- 리테이너 제작 방법
- coiled
- 방패 수량
- 2
- 특별 기능
- passivate,qq-p-35 overall;inner and outer ring spacers; dip and centrifuge at 200 g f 0.9 min to 1.1 max minutes with specified lubricant
- 사양/표준 데이터
- 58260-13084578 government specification
- 표준 허용 오차 지정
- abec no. 7p
- 표면 마감
- ground
- 윤활재
- unable to decode
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 13084578. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-01-181-0844?
- The FSCG of the NSN 3110-01-181-0844 is 3110
- Does the NSN 3110-01-181-0844 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105068
- Does NSN 3110-01-181-0844 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-01-181-0844 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3110-01-181-0844 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-01-181-0844 was assigned to the Federal Catalog?
- It was assigned 42년 전, on Wed, Jun 6, 1984