3110-01-346-0571 Duplex Ball Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3110-01-346-0571.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3110-01-346-0571. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3110 비장착형 마찰 방지 베어링
- (NSN) 국가 재고 번호
- 3110-01-346-0571
- 품목 이름 코드
- 30213
- 연방 품목 식별 가이드
- A044A0
- 배정 날짜
- 09/26/1991
치수적으로 선택된 두 개의 단열 환형 볼 베어링이 한 쌍 또는 세트로 구성됩니다. 링 면은 특정 오프셋으로 특수 연삭되어 장착 시 미리 정해진 예압을 생성합니다. 이중 장착을 위해 특수 연삭된 면을 가진 단열 앵귤러 콘택트 베어링이 포함될 수 있습니다.
mil-g-81322 mil spec single material response lubrication material document and classification, 4.7494 inches minimum and 4.7500 inches maximum bore diameter, angular load direction, 30.0 degrees nominal contact angle, 100.0 pounds nominal bearing preload rating
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3110-01-346-0571 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 베어링 예압 정격
- 100.0 pounds nominal
- 보어 직경
- 4.7494 inches minimum and 4.7500 inches maximum
- 접촉각
- 30.0 degrees nominal
- 하중 방향
- angular
- 윤활 재료 문서 및 분류
- mil-g-81322 mil spec single material response
- 전체 외경
- 5.2492 inches minimum and 5.2500 inches maximum
- 전체 너비
- 0.4950 inches minimum and 0.5000 inches maximum
- 재료 문서 및 분류
- unable to decodeunable to decodeunable to decode
- 재료
- 리테이너 제작 방법
- molded
- 특별 기능
- 0.010-in. min gap-inner races clamped at assy to obtain preload; e52100 races coated with kaydon cr101 cromate;25 pct full of specified lube
- 표면 마감
- ground
- 윤활재
- unable to decode
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3110-01-346-0571. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3110-01-346-0571?
- The FSCG of the NSN 3110-01-346-0571 is 3110
- Does the NSN 3110-01-346-0571 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105068
- Does NSN 3110-01-346-0571 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-01-346-0571 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3110-01-346-0571 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-01-346-0571 was assigned to the Federal Catalog?
- It was assigned 34년 전, on Thu, Sep 26, 1991