A51G10590-13 Sleeve Bearing
포괄적인 명세 및 신청 세부사항: A51G10590-13 Sleeve Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. A51G10590-13. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- A51G10590-13
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-006-0506
- 품목 이름 코드
- 13205
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 06/19/1972
플랜지가 있거나 없는 관형 제품으로, 마찰을 줄이고 보어 축과 평행한 표면에 운동 하중을 전달하도록 설계되었습니다. 눈에 보이거나 감지할 수 있는 윤활 수단이 있거나 자체 윤활이 가능해야 합니다. 전체 길이는 외경의 25% 또는 본체 주변 평면 사이의 최단 거리를 초과해야 합니다. 단, 플랜지나 숄더가 없는 직선 관형 제품으로 보어 축과만 평행한 베어링 표면이 있는 경우는 예외입니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 제품이 포함됩니다. 부싱, 슬리브, 스페이서, 슬리브 및 와셔(개정된 경우)도 참조하십시오. 제외: 핀, 중공.
length 0.565 to 0.58 inches, body inside diameter 0.618 to 0.62 inches, copper material, body outside diameter 0.813 to 0.814 inches.
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-006-0506 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 재료
- Copper alloy 630
- 표면 그루브 위치 및 수량
- 1 internal
- 표면 마감
- 125 microinches
- 모서리 모양
- Square outside right corner
- 모서리 모양
- Square outside left corner
- 모서리 모양
- Square left flange outside right corner
- 모서리 모양
- Square inside right corner
- 모서리 모양
- Round left flange body corner
- 모서리 모양
- Chamfered inside left corner
- 윤활제 숙박 스타일
- Grooved open both ends
- 플랜지 폭
- 0.12 inches to 0.125 inches
- 플랜지 외경
- 1.12 inches to 1.13 inches
- 본체 내부 직경
- 0.618 inches to 0.62 inches
- 본체 외경
- 0.813 inches to 0.814 inches
- 전체 길이
- 0.565 inches to 0.58 inches
- 재료 문서 및 분류
- Ams 4640 assn std single material response
- 스타일 지정자
- 22c solid, external flange one end
- 스타일 지정자
- Solid, external flange one end
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. A51G10590-13. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-006-0506?
- The FSCG of the NSN 3120-00-006-0506 is 3120
- Does the NSN 3120-00-006-0506 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3120-00-006-0506 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-006-0506 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-006-0506 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-006-0506 was assigned to the Federal Catalog?
- It was assigned 54년 전, on Mon, Jun 19, 1972
- What is nsn 3120-00-006-0506 made of?
- Copper Alloy