3120-00-089-3318 Thrust Washer Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-00-089-3318.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-00-089-3318. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-089-3318
- 품목 이름 코드
- 13211
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 01/01/1960
영어: 일반적으로 평면 또는 구형 표면 하나와 중앙에 구멍이 있는 모든 주변 모양의 품목입니다. 움직이는(운동) 하중과 관련된 적용 분야에 맞게 설계되었습니다. 베어링 품질의 합성(플라스틱)으로 제작되었거나 다층 재료로 구성된 품목을 제외하고, 하나의 베어링 표면은 32마이크로인치(0.8마이크로미터) 이하의 특정 표면 마감 지정, 산술 평균(aa)(산술 평균 편차) 또는 다음 조건 중 하나를 가져야 합니다. 랩핑 또는 연삭, 눈에 보이거나 감지 가능한 윤활 수단, 홈, 압입 또는 자체 윤활. 두께는 주변 평면 사이의 가장 짧은 거리의 외경의 25%를 초과해서는 안 됩니다(두께 및/또는 외경이 공차 치수로 지정된 경우 최대 치수가 적합성을 결정하는 데 사용됩니다). 제외: 보어 축과 평행한 베어링 표면을 가진 직선형, 관형(플랜지 없음) 품목. 와셔, 플랫 및 스페이서, 슬리브도 참조하십시오.
square fourth outside corner corner shape, chamfered second outside corner corner shape, square first outside corner corner shape, round center hole shape style, square fourth inside corner corner shape
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-089-3318 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 중앙 구멍 모양 스타일
- round
- 모서리 모양
- chamfered second outside corner
- 모서리 모양
- square first outside corner
- 모서리 모양
- square fourth inside corner
- 모서리 모양
- square fourth outside corner
- 모서리 모양
- square second inside corner
- 모서리 모양
- square third inside corner
- 카운터보어 깊이
- 0.0380 inches minimum and 0.0390 inches maximum
- 카운터보어 직경
- 0.8600 inches minimum and 0.8650 inches maximum
- 단면 모양 스타일
- counterbored
- 지름
- 0.3434 inches minimum and 0.3444 inches maximum
- 윤활 기능
- groove external surface member
- 외경
- 1.0700 inches minimum and 1.0750 inches maximum
- 전체 두께
- 0.0770 inches minimum and 0.0790 inches maximum
- 재료 문서 및 분류
- 4827 81343 mfr ref single material response outer layer
- 재료
- copper alloy outer layer
- 재료
- oil lubricating lubrication
- 재료
- steel inner layer
- 스타일 지정자
- round
- 표면 마감
- 125.0 microinches largest outside diameter
- 표면 마감
- 125.0 microinches inside diameter surface of body
- 표면 마감
- 125.0 microinches right side
- 표면 마감
- 32.0 microinches left side
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-00-089-3318. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-089-3318?
- The FSCG of the NSN 3120-00-089-3318 is 3120
- Does the NSN 3120-00-089-3318 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105008
- Does NSN 3120-00-089-3318 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3120-00-089-3318 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-089-3318 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-089-3318 was assigned to the Federal Catalog?
- It was assigned 66년 전, on Fri, Jan 1, 1960