51191 Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: 51191 Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 51191. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 51191
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-132-4983
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 12/30/1968
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
59.0 rockwell c nominal inner member hardness rating, 0.2450 inches minimum and 0.2500 inches maximum inner member width, 0.1895 inches minimum and 0.1915 inches maximum bore diameter, 0.9700 inches minimum and 1.0300 inches maximum bore center to shank end distance, 34.0 rockwell c nominal rod end body hardness rating
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-132-4983 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.1895 inches minimum and 0.1915 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 0.9700 inches minimum and 1.0300 inches maximum
- 경도 등급
- 34.0 rockwell c nominal rod end body
- 경도 등급
- 59.0 rockwell c nominal inner member
- 내부 멤버 너비
- 0.2450 inches minimum and 0.2500 inches maximum
- 전체 길이
- 1.2680 inches minimum and 1.3110 inches maximum
- 재료 문서 및 분류
- mil-s-6728 mil spec single material response rod end body
- 재료 문서 및 분류
- qq-c-465 fed spec single material response race insert
- 재료 문서 및 분류
- qq-s-763 fed spec single material response inner member
- 재료 문서 및 분류
- sae 40 assn std single material response lubrication
- 재료
- copper alloy race insert
- 재료
- oil lubricating lubrication
- 재료
- steel inner member
- 재료
- steel rod end body
- 외부 멤버 외부 직경
- 0.5420 inches minimum and 0.5620 inches maximum
- 외부 멤버 너비
- 0.1770 inches minimum and 0.1970 inches maximum
- 섕크 스타일
- externally threaded
- 섕크 나사산 길이
- 0.5900 inches minimum and 0.6000 inches maximum
- 특별 기능
- lubrication groove formed by two piece race insert
- 정적 반경 하중 정격
- 2890 pounds
- 스타일 지정자
- ball type
- 표면 처리 문서 및 분류
- qq-p-416,type 2,cl 3 fed spec single treatment response inner member
- 표면 처리 문서 및 분류
- qq-p-416,type 2,cl 3 fed spec single treatment response rod end body
- 표면 처리
- cadmium rod end body
- 표면 처리
- chromium inner member
- 테스트 데이터 문서
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 81349- mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 스레드 클래스
- 3a
- 나사산 직경
- 0.250 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 28
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 51191. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-132-4983?
- The FSCG of the NSN 3120-00-132-4983 is 3120
- Does the NSN 3120-00-132-4983 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-132-4983 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-132-4983 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-132-4983 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-132-4983 was assigned to the Federal Catalog?
- It was assigned 57년 전, on Mon, Dec 30, 1968