3120-00-198-9508 Sleeve Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-00-198-9508.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-00-198-9508. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-198-9508
- 품목 이름 코드
- 13205
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 03/18/1973
플랜지가 있거나 없는 관형 제품으로, 마찰을 줄이고 보어 축과 평행한 표면에 운동 하중을 전달하도록 설계되었습니다. 눈에 보이거나 감지할 수 있는 윤활 수단이 있거나 자체 윤활이 가능해야 합니다. 전체 길이는 외경의 25% 또는 본체 주변 평면 사이의 최단 거리를 초과해야 합니다. 단, 플랜지나 숄더가 없는 직선 관형 제품으로 보어 축과만 평행한 베어링 표면이 있는 경우는 예외입니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 제품이 포함됩니다. 부싱, 슬리브, 스페이서, 슬리브 및 와셔(개정된 경우)도 참조하십시오. 제외: 핀, 중공.
square left flange outside right corner corner shape, square left flange body corner corner shape, 1.3500 inches nominal body outside diameter, square outside left corner corner shape, 0.5900 inches nominal body inside diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-198-9508 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 본체 내부 직경
- 0.5900 inches nominal
- 본체 외경
- 1.3500 inches nominal
- 모서리 모양
- square left flange body corner
- 모서리 모양
- square left flange outside right corner
- 모서리 모양
- square outside left corner
- 모서리 모양
- square inside left corner
- 모서리 모양
- square inside right corner
- 모서리 모양
- square outside right corner
- 플랜지 외경
- 1.6270 inches minimum and 1.6300 inches maximum
- 플랜지 폭
- 0.4000 inches nominal
- 전체 길이
- 1.1860 inches nominal
- 재료
- steel comp 203ez or steel comp 303 or steel comp 303se or steel comp 303ma or steel comp 303pb or steel comp 303cu or steel comp 303 plus x or steel comp 416 or steel comp 416se or steel comp 416 plus x or steel comp 420f or steel comp 420fse or steel comp 430f or steel comp 430fse or steel comp 440f or steel comp 440fse overall
- 특별 기능
- right end surface of body counterbored 0.9100 in. dia by 0.5000 in. dp,groove on flange for locking feature,knurled on outside dia of flange
- 스타일 지정자
- solid, external flange one end
- 표면 마감
- 125.0 microinches outside diameter surface of flange
- 표면 마감
- 125.0 microinches left end surface of body and flange
- 표면 마감
- 125.0 microinches right end surface of body
- 표면 마감
- 125.0 microinches right end surface of left flange
- 표면 마감
- 250.0 microinches outside diameter surface of body
- 표면 마감
- 250.0 microinches inside diameter surface of body
- 표면 처리 문서 및 분류
- qq-p-35 type 2 fed spec single treatment response overall
- 표면 처리
- passivate overall
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| RB12824 | Sleeve Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-00-198-9508. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-198-9508?
- The FSCG of the NSN 3120-00-198-9508 is 3120
- Does the NSN 3120-00-198-9508 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3120-00-198-9508 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-198-9508 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-00-198-9508 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-198-9508 was assigned to the Federal Catalog?
- It was assigned 53년 전, on Sun, Mar 18, 1973