REM4TH16-2 Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: REM4TH16-2 Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. REM4TH16-2. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- REM4TH16-2
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-252-2355
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 02/24/1969
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
0.2495 inches minimum and 0.2500 inches maximum bore diameter, 57.0 rockwell c minimum and 61.0 rockwell c maximum inner member hardness rating, 1.3980 inches minimum and 1.4280 inches maximum bore center to shank end distance, 0.4250 inches minimum and 0.4300 inches maximum inner member width, 26.0 rockwell c nominal rod end body hardness rating
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-252-2355 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.2495 inches minimum and 0.2500 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 1.3980 inches minimum and 1.4280 inches maximum
- 경도 등급
- 57.0 rockwell c minimum and 61.0 rockwell c maximum inner member
- 경도 등급
- 26.0 rockwell c nominal rod end body
- 내부 멤버 너비
- 0.4250 inches minimum and 0.4300 inches maximum
- 재료 문서 및 분류
- 206-001-057-3,97499 mfr ref single material response race liner
- 전체 길이
- 1.7990 inches minimum and 1.8390 inches maximum
- 재료 문서 및 분류
- fed-std-66 fed std single material response internal rod end body
- 재료 문서 및 분류
- fed-std-66 fed std single material response inner member
- 재료 문서 및 분류
- fed-std-66 fed std single material response race insert
- 재료
- plastic tetrafluoroethylene race liner
- 재료
- steel inner member
- 재료
- steel internal rod end body
- 재료
- steel race insert
- 외부 멤버 외부 직경
- 0.8020 inches minimum and 0.8220 inches maximum
- 외부 멤버 너비
- 0.3020 inches minimum and 0.3120 inches maximum
- 생크 끝에서 어깨 길이까지
- 0.4550 inches minimum and 0.4850 inches maximum
- 섕크 스타일
- externally threaded
- 섕크 나사산 길이
- 0.4930 inches minimum and 0.5280 inches maximum
- 특별 기능
- exclude plating on shank
- 정적 반경 하중 정격
- 1800 pounds
- 스타일 지정자
- shouldered ball type
- 표면 처리
- cadmium rod end body
- 표면 처리
- chromium inner member
- 스레드 클래스
- 3a
- 나사산 직경
- 0.250 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 28
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. REM4TH16-2. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-252-2355?
- The FSCG of the NSN 3120-00-252-2355 is 3120
- Does the NSN 3120-00-252-2355 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-252-2355 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-252-2355 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-252-2355 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-252-2355 was assigned to the Federal Catalog?
- It was assigned 57년 전, on Mon, Feb 24, 1969