3120-00-316-8121 Self-Aligning Plain Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-00-316-8121.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-00-316-8121. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-316-8121
- 품목 이름 코드
- 13208
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 11/18/1973
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 구름 요소를 사용하지 않습니다. 이 제품은 외륜이 장착된 정밀 연삭 볼(또는 구형 플레인 베어링)로 구성됩니다. 조립체는 분리형과 비분리형으로 나뉩니다. 제외 대상: 플레인 베어링, 로드 엔드 및 플레인 베어링, 구형.
plastic polytetrafluoroethylene race liner material, 5.0600 inches minimum and 5.0605 inches maximum bore diameter, 1.3700 inches minimum and 1.3750 inches maximum inner member width, 26.0 rockwell c minimum and 35.0 rockwell c maximum outer race member hardness rating, 55.0 rockwell c minimum and 60.0 rockwell c maximum inner member hardness rating
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-316-8121 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 5.0600 inches minimum and 5.0605 inches maximum
- 경도 등급
- 55.0 rockwell c minimum and 60.0 rockwell c maximum inner member
- 경도 등급
- 26.0 rockwell c minimum and 35.0 rockwell c maximum outer race member
- 내부 멤버 너비
- 1.3700 inches minimum and 1.3750 inches maximum
- 재료
- plastic polytetrafluoroethylene race liner
- 재료
- steel comp 440c inner member
- 재료
- steel comp 630 outer race member
- 외부 멤버 외부 직경
- 5.9195 inches minimum and 5.9200 inches maximum
- 외부 멤버 너비
- 1.1650 inches minimum and 1.1700 inches maximum
- 정적 반경 하중 정격
- 185000 pounds
- 스타일 지정자
- with insert and/or liner
- 테스트 데이터 문서
- "81349-mil-i=6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 03-823-81E-003 | Self-Aligning Plain Bearing |
| 4M286-81 | Self-Aligning Plain Bearing |
| HSP81TL102 | Self-Aligning Plain Bearing |
| KMDB81-1 | Self-Aligning Plain Bearing |
| LDS81E-111 | Self-Aligning Plain Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-00-316-8121. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-316-8121?
- The FSCG of the NSN 3120-00-316-8121 is 3120
- Does the NSN 3120-00-316-8121 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482300040
- Does NSN 3120-00-316-8121 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3120-00-316-8121 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-316-8121 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-316-8121 was assigned to the Federal Catalog?
- It was assigned 52년 전, on Sun, Nov 18, 1973