24936 Sleeve Bearing
포괄적인 명세 및 신청 세부사항: 24936 Sleeve Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 24936. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 24936
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-328-2155
- 품목 이름 코드
- 13205
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 01/01/1963
플랜지가 있거나 없는 관형 제품으로, 마찰을 줄이고 보어 축과 평행한 표면에 운동 하중을 전달하도록 설계되었습니다. 눈에 보이거나 감지할 수 있는 윤활 수단이 있거나 자체 윤활이 가능해야 합니다. 전체 길이는 외경의 25% 또는 본체 주변 평면 사이의 최단 거리를 초과해야 합니다. 단, 플랜지나 숄더가 없는 직선 관형 제품으로 보어 축과만 평행한 베어링 표면이 있는 경우는 예외입니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 제품이 포함됩니다. 부싱, 슬리브, 스페이서, 슬리브 및 와셔(개정된 경우)도 참조하십시오. 제외: 핀, 중공.
square center flange outside left corner corner shape, chamfered center flange left body corner corner shape, 0.4980 inches minimum and 0.5030 inches maximum body inside diameter, 2 slot antirotation/lubrication type and quantity, square center flange outside right corner corner shape
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-328-2155 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 회전 방지/윤활 유형 및 수량
- 2 slot
- 본체 내부 직경
- 0.4980 inches minimum and 0.5030 inches maximum
- 모서리 모양
- chamfered center flange left body corner
- 모서리 모양
- square center flange outside left corner
- 모서리 모양
- square center flange outside right corner
- 모서리 모양
- square center flange right body corner
- 모서리 모양
- square outside left corner
- 모서리 모양
- square inside left corner
- 모서리 모양
- square inside right corner
- 모서리 모양
- square outside right corner
- 끝에서 플랜지까지의 거리
- 0.0630 inches nominal
- 플랜지 외경
- 0.6400 inches nominal
- 플랜지 폭
- 0.0470 inches nominal
- 내부 플랜지 구멍 직경
- 0.4250 inches minimum and 0.4280 inches maximum
- 내부 플랜지 왼쪽 끝에서 중심선까지의 거리
- 0.0260 inches minimum and 0.0300 inches maximum
- 내부 플랜지 너비
- 0.0360 inches nominal
- 좌측 끝 본체 직경
- 0.5600 inches minimum and 0.5630 inches maximum
- 왼쪽 내부 플랜지 구멍 직경
- 0.3900 inches nominal
- 윤활제 숙박 스타일
- grooved open both ends
- 전체 길이
- 0.3440 inches nominal
- 재료
- copper alloy overall
- 오른쪽 끝 본체 직경
- 0.5600 inches minimum and 0.5630 inches maximum
- 슬롯 길이
- 0.1220 inches nominal first
- 슬롯 너비
- 0.0950 inches minimum and 0.0980 inches maximum first
- 스타일 지정자
- solid, external flange, interior flange(s) not located at either end
- 표면 홈 위치 및 수량
- 4 internal
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 24936. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-328-2155?
- The FSCG of the NSN 3120-00-328-2155 is 3120
- Does the NSN 3120-00-328-2155 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3120-00-328-2155 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-328-2155 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-00-328-2155 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-328-2155 was assigned to the Federal Catalog?
- It was assigned 63년 전, on Tue, Jan 1, 1963