3120-00-495-3036 Sleeve Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-00-495-3036.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-00-495-3036. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-495-3036
- 품목 이름 코드
- 13205
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 06/28/1971
플랜지가 있거나 없는 관형 제품으로, 마찰을 줄이고 보어 축과 평행한 표면에 운동 하중을 전달하도록 설계되었습니다. 눈에 보이거나 감지할 수 있는 윤활 수단이 있거나 자체 윤활이 가능해야 합니다. 전체 길이는 외경의 25% 또는 본체 주변 평면 사이의 최단 거리를 초과해야 합니다. 단, 플랜지나 숄더가 없는 직선 관형 제품으로 보어 축과만 평행한 베어링 표면이 있는 경우는 예외입니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 제품이 포함됩니다. 부싱, 슬리브, 스페이서, 슬리브 및 와셔(개정된 경우)도 참조하십시오. 제외: 핀, 중공.
1.3750 inches nominal body outside diameter, chamfered outside right corner corner shape, 1 hole antirotation/lubrication type and quantity, chamfered inside left corner corner shape, 1.1190 inches minimum and 1.1240 inches maximum body inside diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-495-3036 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 회전 방지/윤활 유형 및 수량
- 1 hole
- 본체 내부 직경
- 1.1190 inches minimum and 1.1240 inches maximum
- 본체 외경
- 1.3750 inches nominal
- 모서리 모양
- chamfered outside right corner
- 모서리 모양
- chamfered inside left corner
- 모서리 모양
- chamfered outside left corner
- 모서리 모양
- square left flange body corner
- 모서리 모양
- square left flange outside right corner
- 모서리 모양
- square inside right corner
- 플랜지 외경
- 1.8130 inches nominal
- 플랜지 폭
- 0.1560 inches nominal
- 구멍 직경
- 0.0600 inches nominal first
- 윤활제 숙박 스타일
- grooved circular
- 전체 길이
- 0.6810 inches nominal
- 재료 문서 및 분류
- qq-c-530,cond ht fed spec all material responses overall
- 재료
- copper alloy 172 or copper alloy 173 overall
- 스타일 지정자
- solid, external flange one end
- 표면 마감
- 125.0 microinches overall
- 표면 홈 위치 및 수량
- 1 internal and 1 external
- 표면 처리 문서 및 분류
- cp-0480,class 3,the bendix corp mfr ref single treatment response left end surface of body and flange
- 표면 처리 문서 및 분류
- cp-0480,class 3,the bendix corp mfr ref single treatment response outside diameter surface of body
- 표면 처리 문서 및 분류
- cp-0480,class 3,the bendix corp mfr ref single treatment response outside diameter surface of flange
- 표면 처리 문서 및 분류
- cp-0480,class 3,the bendix corp mfr ref single treatment response right end surface of body
- 표면 처리 문서 및 분류
- cp-0480,class 3,the bendix corp mfr ref single treatment response right end surface of left flange
- 표면 처리
- cadmium left end surface of body and flange
- 표면 처리
- cadmium outside diameter surface of body
- 표면 처리
- cadmium outside diameter surface of flange
- 표면 처리
- cadmium right end surface of body
- 표면 처리
- cadmium right end surface of left flange
- 테스트 데이터 문서
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 2578522-001A | Sleeve Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-00-495-3036. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-495-3036?
- The FSCG of the NSN 3120-00-495-3036 is 3120
- Does the NSN 3120-00-495-3036 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3120-00-495-3036 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-495-3036 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-495-3036 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-495-3036 was assigned to the Federal Catalog?
- It was assigned 55년 전, on Mon, Jun 28, 1971