3120-00-528-4378 Sleeve Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-00-528-4378.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-00-528-4378. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-528-4378
- 품목 이름 코드
- 13205
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 09/01/1974
플랜지가 있거나 없는 관형 제품으로, 마찰을 줄이고 보어 축과 평행한 표면에 운동 하중을 전달하도록 설계되었습니다. 눈에 보이거나 감지할 수 있는 윤활 수단이 있거나 자체 윤활이 가능해야 합니다. 전체 길이는 외경의 25% 또는 본체 주변 평면 사이의 최단 거리를 초과해야 합니다. 단, 플랜지나 숄더가 없는 직선 관형 제품으로 보어 축과만 평행한 베어링 표면이 있는 경우는 예외입니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 제품이 포함됩니다. 부싱, 슬리브, 스페이서, 슬리브 및 와셔(개정된 경우)도 참조하십시오. 제외: 핀, 중공.
0.3750 inches minimum and 0.3760 inches maximum body inside diameter, square left flange body corner corner shape, 2 hole antirotation/lubrication type and quantity, 0.5017 inches minimum and 0.5022 inches maximum body outside diameter, square left flange outside right corner corner shape
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-528-4378 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 회전 방지/윤활 유형 및 수량
- 2 hole
- 본체 내부 직경
- 0.3750 inches minimum and 0.3760 inches maximum
- 본체 외경
- 0.5017 inches minimum and 0.5022 inches maximum
- 모서리 모양
- square left flange body corner
- 모서리 모양
- square left flange outside right corner
- 모서리 모양
- square outside left corner
- 모서리 모양
- square inside left corner
- 모서리 모양
- square inside right corner
- 모서리 모양
- square outside right corner
- 플랜지 외경
- 0.6156 inches minimum and 0.6356 inches maximum
- 플랜지 폭
- 0.0603 inches minimum and 0.0643 inches maximum
- 구멍 직경
- 0.0450 inches minimum first
- 구멍 직경
- 0.0550 inches maximum second
- 윤활제 숙박 스타일
- grooved circular
- 전체 길이
- 0.8335 inches minimum and 0.8435 inches maximum
- 재료 문서 및 분류
- ams 4660 assn std single material response or ams 4880 assn std single material response overall
- 재료
- copper alloy 630 overall
- 사양/표준 데이터
- 36659-ls11164 government standard
- 스타일 지정자
- solid, external flange one end
- 표면 마감
- 125.0 microinches outside diameter surface of flange
- 표면 마감
- 125.0 microinches right end surface of body
- 표면 마감
- 125.0 microinches right end surface of left flange
- 표면 마감
- 63.0 microinches inside diameter surface of body
- 표면 마감
- 63.0 microinches left end surface of body and flange
- 표면 마감
- 63.0 microinches outside diameter surface of body
- 표면 홈 위치 및 수량
- 1 internal and 1 external
- 표면 처리 문서 및 분류
- qq-p-416,type 2,class 2 fed spec single treatment response outside diameter surface of flange
- 표면 처리 문서 및 분류
- qq-p-416,type 2,class 2 fed spec single treatment response outside diameter surface of body
- 표면 처리 문서 및 분류
- qq-p-416,type 2,class 2 fed spec single treatment response right end surface of body
- 표면 처리 문서 및 분류
- qq-p-416,type 2,class 2 fed spec single treatment response right end surface of left flange
- 표면 처리
- cadmium and chromate outside diameter surface of flange
- 표면 처리
- cadmium and chromate outside diameter surface of body
- 표면 처리
- cadmium and chromate right end surface of body
- 표면 처리
- cadmium and chromate right end surface of left flange
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| LS11164F6-27G | Sleeve Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-00-528-4378. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-528-4378?
- The FSCG of the NSN 3120-00-528-4378 is 3120
- Does the NSN 3120-00-528-4378 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3120-00-528-4378 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-528-4378 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-00-528-4378 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-528-4378 was assigned to the Federal Catalog?
- It was assigned 51년 전, on Sun, Sep 1, 1974