76283 Thrust Washer Bearing
포괄적인 명세 및 신청 세부사항: 76283 Thrust Washer Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 76283. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 76283
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-678-8593
- 품목 이름 코드
- 13211
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 01/01/1961
영어: 일반적으로 평면 또는 구형 표면 하나와 중앙에 구멍이 있는 모든 주변 모양의 품목입니다. 움직이는(운동) 하중과 관련된 적용 분야에 맞게 설계되었습니다. 베어링 품질의 합성(플라스틱)으로 제작되었거나 다층 재료로 구성된 품목을 제외하고, 하나의 베어링 표면은 32마이크로인치(0.8마이크로미터) 이하의 특정 표면 마감 지정, 산술 평균(aa)(산술 평균 편차) 또는 다음 조건 중 하나를 가져야 합니다. 랩핑 또는 연삭, 눈에 보이거나 감지 가능한 윤활 수단, 홈, 압입 또는 자체 윤활. 두께는 주변 평면 사이의 가장 짧은 거리의 외경의 25%를 초과해서는 안 됩니다(두께 및/또는 외경이 공차 치수로 지정된 경우 최대 치수가 적합성을 결정하는 데 사용됩니다). 제외: 보어 축과 평행한 베어링 표면을 가진 직선형, 관형(플랜지 없음) 품목. 와셔, 플랫 및 스페이서, 슬리브도 참조하십시오.
round center hole shape style, rectangular cross-sectional shape style, 0.1900 inches minimum and 0.2100 inches maximum diameter, square all corners corner shape, 0.3900 inches minimum and 0.4100 inches maximum outside diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-678-8593 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 중앙 구멍 모양 스타일
- round
- 모서리 모양
- square all corners
- 단면 모양 스타일
- rectangular
- 지름
- 0.1900 inches minimum and 0.2100 inches maximum
- 외경
- 0.3900 inches minimum and 0.4100 inches maximum
- 전체 두께
- 0.0330 inches minimum and 0.0390 inches maximum
- 재료 문서 및 분류
- 76283,11599 mfr ref single material response overall
- 재료
- plastic overall
- 스타일 지정자
- round
- 표면 마감
- 125.0 microinches largest outside diameter
- 표면 마감
- 125.0 microinches inside diameter surface of body
- 표면 마감
- 32.0 microinches left side
- 표면 마감
- 32.0 microinches right side
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 76283. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-678-8593?
- The FSCG of the NSN 3120-00-678-8593 is 3120
- Does the NSN 3120-00-678-8593 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105008
- Does NSN 3120-00-678-8593 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-678-8593 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-678-8593 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-678-8593 was assigned to the Federal Catalog?
- It was assigned 65년 전, on Sun, Jan 1, 1961