ARHT6E4 Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: ARHT6E4 Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. ARHT6E4. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- ARHT6E4
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-781-4737
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 01/01/1960
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
2.3020 inches minimum and 2.3220 inches maximum bore center to shank end distance, 23.0 rockwell c minimum and 35.0 rockwell c maximum race insert hardness rating, 0.3745 inches minimum and 0.3750 inches maximum bore diameter, 36.0 rockwell c minimum and 42.0 rockwell c maximum rod end body hardness rating, 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-781-4737 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.3745 inches minimum and 0.3750 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 2.3020 inches minimum and 2.3220 inches maximum
- 경도 등급
- 36.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- 경도 등급
- 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
- 경도 등급
- 23.0 rockwell c minimum and 35.0 rockwell c maximum race insert
- 내부 멤버 너비
- 0.4950 inches minimum and 0.5000 inches maximum
- 전체 길이
- 2.8595 inches minimum and 2.8895 inches maximum
- 재료
- plastic polytetrafluoroethylene race liner
- 재료
- steel comp 440c inner member
- 재료
- steel comp 630 race insert
- 재료
- steel comp 630 rod end body
- 외부 멤버 외부 직경
- 1.1150 inches minimum and 1.1350 inches maximum
- 외부 멤버 너비
- 0.3700 inches minimum and 0.3800 inches maximum
- 섕크 나사산 길이
- 1.3440 inches minimum and 1.4380 inches maximum
- 섕크 스타일
- externally threaded
- 특별 기능
- keyway in shank
- 정적 반경 하중 정격
- 10140 pounds
- 스타일 지정자
- ball type
- 표면 처리
- chromium inner member
- 테스트 데이터 문서
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 스레드 클래스
- 3a
- 나사산 직경
- 0.438 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 20
- 나사 시리즈 지정자
- unf
대체합니다
The NSN 3120-00-781-4737 is used in place of the following discontinued or alternate items:
| NSN | 이름 | 날짜 |
|---|---|---|
| 3120-00-412-3454 | No Name Available | 06/01/2007 |
| 3120-00-870-0158 | No Name Available | 11/01/1989 |
| 3120-00-876-8796 | No Name Available | 12/19/1973 |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. ARHT6E4. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-781-4737?
- The FSCG of the NSN 3120-00-781-4737 is 3120
- Does the NSN 3120-00-781-4737 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-781-4737 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-781-4737 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-00-781-4737 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-781-4737 was assigned to the Federal Catalog?
- It was assigned 66년 전, on Fri, Jan 1, 1960
가격 및 재고
베어링의 가격 및 재고 정보를 알아보려면 양식을 작성하세요. ARHT6E4
재고 가용성
이 제품은 다음과 같은 수량과 조건으로 제공됩니다.
| 신규 잉여금 | 5 |
| 제거됨 | 1 |
| 새로운 소재 | 2 |
| 총 | 8 |
이 항목의 가용성은 다음 날짜에 마지막으로 업데이트되었습니다.
05/25/2026 08:05 PM EDT.
이후 예약 가능 여부가 변경될 수 있습니다. 최신 가격 및 예약 가능 여부를 확인하려면 견적을 요청하세요.