C4CM1463-3 Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: C4CM1463-3 Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. C4CM1463-3. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- C4CM1463-3
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-796-5174
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 01/01/1960
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
0.8118 inches minimum and 0.8123 inches maximum bore diameter, 3.3000 inches nominal overall length, 0.5000 inches nominal inner member width, mil-s-6758 mil spec single material response overall material document and classification, 2.6000 inches minimum and 2.8000 inches maximum bore center to shank end distance
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-796-5174 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 중심에서 섕크 끝까지의 거리
- 2.6000 inches minimum and 2.8000 inches maximum
- 보어 직경
- 0.8118 inches minimum and 0.8123 inches maximum
- 내부 멤버 너비
- 0.5000 inches nominal
- 전체 길이
- 3.3000 inches nominal
- 재료 문서 및 분류
- mil-s-6758 mil spec single material response overall
- 재료
- steel comp 4130 overall
- 외부 멤버 외부 직경
- 1.1900 inches minimum and 1.2100 inches maximum
- 외부 멤버 너비
- 0.3450 inches minimum and 0.3500 inches maximum
- 섕크 나사산 길이
- 1.7400 inches minimum and 1.7600 inches maximum
- 섕크 스타일
- externally threaded
- 스타일 지정자
- ball type
- 스레드 클래스
- 3a
- 나사산 직경
- 0.500 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 20
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. C4CM1463-3. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-796-5174?
- The FSCG of the NSN 3120-00-796-5174 is 3120
- Does the NSN 3120-00-796-5174 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-796-5174 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-796-5174 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-00-796-5174 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-796-5174 was assigned to the Federal Catalog?
- It was assigned 66년 전, on Fri, Jan 1, 1960