TMF8E Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: TMF8E Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. TMF8E. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- TMF8E
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-867-9001
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 01/01/1960
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
3.0790 inches minimum and 3.1215 inches maximum overall length, 0.6200 inches minimum and 0.6250 inches maximum inner member width, 0.4995 inches minimum and 0.5000 inches maximum bore diameter, 2.4280 inches minimum and 2.4480 inches maximum bore center to shank end distance, 66 fed std single material response inner member material document and classification
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-867-9001 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.4995 inches minimum and 0.5000 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 2.4280 inches minimum and 2.4480 inches maximum
- 내부 멤버 너비
- 0.6200 inches minimum and 0.6250 inches maximum
- 전체 길이
- 3.0790 inches minimum and 3.1215 inches maximum
- 재료 문서 및 분류
- 66 fed std single material response inner member
- 재료 문서 및 분류
- 66 fed std single material response race insert
- 재료 문서 및 분류
- 66 fed std single material response rod end body
- 재료
- plastic tetrafluoroethylene race liner
- 재료
- steel comp 4130 rod end body
- 재료
- steel comp 440c inner member
- 재료
- steel comp 410 race insert
- 외부 멤버 외부 직경
- 1.3020 inches minimum and 1.3470 inches maximum
- 외부 멤버 너비
- 0.5100 inches minimum and 0.5200 inches maximum
- 특별 기능
- 9 deg selfalignment in either direction
- 섕크 나사산 길이
- 1.4700 inches minimum and 1.5600 inches maximum
- 섕크 스타일
- externally threaded
- 정적 반경 하중 정격
- 16900 pounds
- 스타일 지정자
- ball type
- 표면 처리 문서 및 분류
- qq-p-416 fed spec all treatment responses rod end body
- 표면 처리
- cadmium or cadmium and chromate or cadmium and phosphate rod end body
- 테스트 데이터 문서
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 스레드 클래스
- 3a
- 나사산 직경
- 0.500 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 20
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. TMF8E. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-867-9001?
- The FSCG of the NSN 3120-00-867-9001 is 3120
- Does the NSN 3120-00-867-9001 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-867-9001 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-867-9001 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-867-9001 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-867-9001 was assigned to the Federal Catalog?
- It was assigned 66년 전, on Fri, Jan 1, 1960