3120-00-947-6943 Rod End Plain Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-00-947-6943.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-00-947-6943. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-00-947-6943
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 04/01/1966
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
2.7500 inches nominal bore center to shank end distance, 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating, 0.3745 inches minimum and 0.3750 inches maximum bore diameter, 24.0 rockwell c minimum and 35.0 rockwell c maximum outer race member hardness rating, 39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body hardness rating
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-00-947-6943 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.3745 inches minimum and 0.3750 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 2.7500 inches nominal
- 경도 등급
- 39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- 경도 등급
- 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
- 경도 등급
- 24.0 rockwell c minimum and 35.0 rockwell c maximum outer race member
- 내부 멤버 너비
- 0.4040 inches minimum and 0.4060 inches maximum
- 전체 길이
- 3.3430 inches nominal
- 재료
- plastic race liner
- 재료
- steel comp 410 outer race member
- 재료
- steel comp e4340 rod end body
- 외부 멤버 외부 직경
- 1.1860 inches nominal
- 외부 멤버 너비
- 0.3750 inches minimum and 0.3850 inches maximum
- 섕크 나사산 길이
- 1.7820 inches nominal
- 섕크 스타일
- externally threaded
- 특별 기능
- entire thd slotted longitudinally 0.0125 in. min,0.1300 in. max w by 0.870 in. min,0.0920 in. max deep,threaded end of shank drilled longitudinally 0.2500 in. dia by 1.4840 in,1.5050 in. max deep
- 정적 반경 하중 정격
- 11000 pounds
- 스타일 지정자
- ball type
- 표면 처리
- cadmium rod end body
- 표면 처리
- chromium inner member
- 테스트 데이터 문서
- "81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 스레드 클래스
- 3a
- 나사산 직경
- 0.750 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 16
- 나사 시리즈 지정자
- unf
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 123HM40053-1 | Rod End Plain Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-00-947-6943. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-00-947-6943?
- The FSCG of the NSN 3120-00-947-6943 is 3120
- Does the NSN 3120-00-947-6943 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-947-6943 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3120-00-947-6943 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-947-6943 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-947-6943 was assigned to the Federal Catalog?
- It was assigned 60년 전, on Fri, Apr 1, 1966