3022565-001 Sleeve Bearing
포괄적인 명세 및 신청 세부사항: 3022565-001 Sleeve Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3022565-001. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 3022565-001
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-024-1909
- 품목 이름 코드
- 13205
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 07/06/1976
플랜지가 있거나 없는 관형 제품으로, 마찰을 줄이고 보어 축과 평행한 표면에 운동 하중을 전달하도록 설계되었습니다. 눈에 보이거나 감지할 수 있는 윤활 수단이 있거나 자체 윤활이 가능해야 합니다. 전체 길이는 외경의 25% 또는 본체 주변 평면 사이의 최단 거리를 초과해야 합니다. 단, 플랜지나 숄더가 없는 직선 관형 제품으로 보어 축과만 평행한 베어링 표면이 있는 경우는 예외입니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 제품이 포함됩니다. 부싱, 슬리브, 스페이서, 슬리브 및 와셔(개정된 경우)도 참조하십시오. 제외: 핀, 중공.
3 hole antirotation/lubrication type and quantity, 1.2470 inches minimum and 1.2490 inches maximum body outside diameter, chamfered inside left corner corner shape, 0.6875 inches minimum and 0.6880 inches maximum body inside diameter, chamfered outside right corner corner shape
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-024-1909 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 회전 방지/윤활 유형 및 수량
- 3 hole
- 본체 내부 직경
- 0.6875 inches minimum and 0.6880 inches maximum
- 본체 외경
- 1.2470 inches minimum and 1.2490 inches maximum
- 모서리 모양
- chamfered outside right corner
- 모서리 모양
- chamfered inside left corner
- 모서리 모양
- chamfered inside right corner
- 모서리 모양
- relief groove left flange body corner
- 모서리 모양
- square left flange outside right corner
- 모서리 모양
- square outside left corner
- 플랜지 외경
- 2.2200 inches minimum and 2.2800 inches maximum
- 플랜지 폭
- 0.2500 inches nominal
- 구멍 직경
- 0.2490 inches minimum and 0.2550 inches maximum first
- 전체 길이
- 0.7400 inches minimum and 0.7600 inches maximum
- 재료 문서 및 분류
- mil-g-23827 mil spec single material response lubrication
- 재료 문서 및 분류
- qq-b-750,comp a fed spec single material response overall
- 재료
- copper alloy 510 overall
- 재료
- grease lubrication
- 스타일 지정자
- solid, external flange one end
- 표면 마감
- 125.0 microinches outside diameter surface of body
- 표면 마감
- 125.0 microinches outside diameter surface of flange
- 표면 마감
- 125.0 microinches left end surface of body and flange
- 표면 마감
- 125.0 microinches right end surface of body
- 표면 마감
- 125.0 microinches right end surface of left flange
- 표면 마감
- 32.0 microinches inside diameter surface of body
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3022565-001. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-024-1909?
- The FSCG of the NSN 3120-01-024-1909 is 3120
- Does the NSN 3120-01-024-1909 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3120-01-024-1909 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-024-1909 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-024-1909 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-024-1909 was assigned to the Federal Catalog?
- It was assigned 50년 전, on Tue, Jul 6, 1976