2040826-1 Sleeve Bushing
포괄적인 명세 및 신청 세부사항: 2040826-1 Sleeve Bushing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 2040826-1. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 2040826-1
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-132-2234
- 품목 이름 코드
- 13206
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 05/25/1982
한쪽 끝에 플랜지가 있거나 없는 나사산이 없는 관 모양의 제품으로, 구멍의 내경을 줄이고 주변 차체 구조를 응력, 변형 및/또는 진동으로 인한 손상으로부터 보호하기 위해 구멍에 삽입되도록 설계되었습니다. 전체 길이는 차체 외경의 25% 또는 차체 주변 평면 사이의 최단 거리보다 길어야 합니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 품목이 포함됩니다. 고무로 제작된 품목은 비금속 부싱을 참조하십시오. 베어링 슬리브, 테이퍼형 부싱, 스페이서 슬리브, 절연체 부싱, 전기 도체 부싱도 참조하십시오. 제외: 부싱, 드릴, 지그.
0.4900 inches minimum and 0.5100 inches maximum flange outside diameter, 0.3754 inches minimum and 0.3758 inches maximum body outside diameter, 0.0600 inches minimum and 0.0620 inches maximum flange width, 0.3030 inches minimum and 0.3100 inches maximum overall length, 0.2500 inches minimum and 0.2510 inches maximum body inside diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-132-2234 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 본체 내부 직경
- 0.2500 inches minimum and 0.2510 inches maximum
- 본체 외경
- 0.3754 inches minimum and 0.3758 inches maximum
- 플랜지 외경
- 0.4900 inches minimum and 0.5100 inches maximum
- 플랜지 폭
- 0.0600 inches minimum and 0.0620 inches maximum
- 전체 길이
- 0.3030 inches minimum and 0.3100 inches maximum
- 특별 기능
- plating on id optional
- 테스트 데이터 문서
- "70210-ems 92322 class b specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 2040826-1. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-132-2234?
- The FSCG of the NSN 3120-01-132-2234 is 3120
- Does the NSN 3120-01-132-2234 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997060
- Does NSN 3120-01-132-2234 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-132-2234 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-132-2234 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-132-2234 was assigned to the Federal Catalog?
- It was assigned 44년 전, on Tue, May 25, 1982