10108080 Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: 10108080 Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 10108080. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 10108080
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-135-7330
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 07/30/1982
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
0.4350 inches minimum and 0.4370 inches maximum inner member width, 3.0000 inches nominal bore center to shank end distance, 0.3120 inches minimum and 0.3125 inches maximum bore diameter, 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating, 28.0 rockwell c minimum and 37.0 rockwell c maximum race insert hardness rating
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-135-7330 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.3120 inches minimum and 0.3125 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 3.0000 inches nominal
- 경도 등급
- 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
- 경도 등급
- 28.0 rockwell c minimum and 37.0 rockwell c maximum race insert
- 내부 멤버 너비
- 0.4350 inches minimum and 0.4370 inches maximum
- 검사 구멍 중심에서 끝까지 거리
- 0.4400 inches nominal
- 전체 길이
- 3.5600 inches nominal
- 재료
- plastic polytetrafluoroethylene race liner
- 재료
- steel comp 440c or steel comp xm-13 inner member
- 재료
- steel comp 630 race insert
- 재료
- steel comp xm-12 rod end body
- 외부 멤버 외부 직경
- 1.1200 inches nominal
- 외부 멤버 너비
- 0.3120 inches minimum and 0.3220 inches maximum
- 렌치 플랫 전체의 섕크 너비
- 0.5530 inches minimum and 0.5630 inches maximum
- 섕크 스타일
- internally threaded w/bead and wrench flats and inspection hole
- 섕크 나사산 길이
- 1.3000 inches nominal
- 특별 기능
- four equally spaced slots for locking washer in end of shank; w/o bead on shank
- 스타일 지정자
- ball type
- 표면 처리
- passivate rod end body
- 테스트 데이터 문서
- "76301-ps21201 class b specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 스레드 클래스
- 3b
- 나사산 직경
- 0.375 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 24
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 10108080. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-135-7330?
- The FSCG of the NSN 3120-01-135-7330 is 3120
- Does the NSN 3120-01-135-7330 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-135-7330 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-135-7330 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-135-7330 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-135-7330 was assigned to the Federal Catalog?
- It was assigned 44년 전, on Fri, Jul 30, 1982