C7505A8-030 Sleeve Bearing
포괄적인 명세 및 신청 세부사항: C7505A8-030 Sleeve Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. C7505A8-030. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- C7505A8-030
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-141-2521
- 품목 이름 코드
- 13205
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 10/26/1982
플랜지가 있거나 없는 관형 제품으로, 마찰을 줄이고 보어 축과 평행한 표면에 운동 하중을 전달하도록 설계되었습니다. 눈에 보이거나 감지할 수 있는 윤활 수단이 있거나 자체 윤활이 가능해야 합니다. 전체 길이는 외경의 25% 또는 본체 주변 평면 사이의 최단 거리를 초과해야 합니다. 단, 플랜지나 숄더가 없는 직선 관형 제품으로 보어 축과만 평행한 베어링 표면이 있는 경우는 예외입니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 제품이 포함됩니다. 부싱, 슬리브, 스페이서, 슬리브 및 와셔(개정된 경우)도 참조하십시오. 제외: 핀, 중공.
square outside left corner corner shape, 0.5005 inches minimum and 0.5015 inches maximum body inside diameter, 0.6260 inches minimum and 0.6265 inches maximum body outside diameter, square inside left corner corner shape, square left flange outside right corner corner shape
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-141-2521 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 본체 내부 직경
- 0.5005 inches minimum and 0.5015 inches maximum
- 본체 외경
- 0.6260 inches minimum and 0.6265 inches maximum
- 모서리 모양
- square left flange outside right corner
- 모서리 모양
- square outside left corner
- 모서리 모양
- square inside left corner
- 모서리 모양
- square inside right corner
- 모서리 모양
- square outside right corner
- 모서리 모양
- undercut left flange body corner
- 플랜지 외경
- 0.7400 inches minimum and 0.7600 inches maximum
- 플랜지 폭
- 0.0570 inches minimum and 0.0620 inches maximum
- 전체 길이
- 0.3520 inches minimum and 0.3670 inches maximum
- 재료 문서 및 분류
- mil-b-81934 mil spec single material response and mil-b-81934/2 mil spec single material response inner layer
- 재료 문서 및 분류
- mil-b-81934 mil spec single material response and mil-b-81934/2 mil spec single material response left end surface of body and flange
- 재료 문서 및 분류
- qq-a-225/6,cond t851 fed spec single material response or qq-a-200/3,cond t8511 fed spec single material response outer layer
- 재료
- aluminum alloy 2024 outer layer
- 재료
- plastic polytetrafluoroethylene inner layer
- 재료
- plastic polytetrafluoroethylene left end surface of body and flange
- 사양/표준 데이터
- 81755-c7505 manufacturers standard
- 스타일 지정자
- solid, external flange one end
- 표면 마감
- 63.0 microinches outside diameter surface of body
- 표면 처리 문서 및 분류
- mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response outer layer
- 표면 처리
- anodize or chromate outer layer
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. C7505A8-030. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-141-2521?
- The FSCG of the NSN 3120-01-141-2521 is 3120
- Does the NSN 3120-01-141-2521 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3120-01-141-2521 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-141-2521 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-141-2521 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-141-2521 was assigned to the Federal Catalog?
- It was assigned 43년 전, on Tue, Oct 26, 1982