3120-01-160-2221 Rod End Plain Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-01-160-2221.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-01-160-2221. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-160-2221
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 08/19/1983
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
0.2495 inches minimum and 0.2500 inches maximum bore diameter, 28.0 rockwell c minimum outer race member hardness rating, 58.0 rockwell c minimum inner member hardness rating, 26.0 rockwell c minimum and 33.0 rockwell c maximum rod end body hardness rating, 2.1000 inches nominal bore center to shank end distance
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-160-2221 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.2495 inches minimum and 0.2500 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 2.1000 inches nominal
- 경도 등급
- 58.0 rockwell c minimum inner member
- 경도 등급
- 26.0 rockwell c minimum and 33.0 rockwell c maximum rod end body
- 경도 등급
- 28.0 rockwell c minimum outer race member
- 내부 멤버 너비
- 0.4350 inches minimum and 0.4370 inches maximum
- 전체 길이
- 2.6000 inches nominal
- 재료 문서 및 분류
- ams 5613 assn std single material response outer race member
- 재료 문서 및 분류
- ams 5630 assn std single material response inner member
- 재료 문서 및 분류
- mil-s-6758,cond d mil spec single material response rod end body
- 재료
- fiber and plastic polytetrafluoroethylene race liner
- 재료
- steel comp 4130 rod end body
- 재료
- steel comp 440c inner member
- 재료
- steel comp 410 outer race member
- 외부 멤버 외부 직경
- 1.0000 inches nominal
- 외부 멤버 너비
- 0.3220 inches minimum and 0.3320 inches maximum
- 섕크 구멍 길이
- 1.2500 inches nominal
- 섕크 내경
- 0.5000 inches nominal
- 섕크 직경
- 0.6230 inches minimum and 0.6250 inches maximum
- 섕크 스타일
- hollow, unthreaded
- 스타일 지정자
- ball type
- 표면 처리 문서 및 분류
- mil-l-19538 mil spec single treatment response rod end body
- 표면 처리
- lacquer rod end body
- 테스트 데이터 문서
- "78286-ss8805 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 65652-11104-043 | Rod End Plain Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-01-160-2221. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-160-2221?
- The FSCG of the NSN 3120-01-160-2221 is 3120
- Does the NSN 3120-01-160-2221 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-160-2221 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-160-2221 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-160-2221 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-160-2221 was assigned to the Federal Catalog?
- It was assigned 43년 전, on Fri, Aug 19, 1983