HT192-101 Self-Aligning Plain Bearing
포괄적인 명세 및 신청 세부사항: HT192-101 Self-Aligning Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. HT192-101. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- HT192-101
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-173-3763
- 품목 이름 코드
- 13208
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 03/05/1984
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 구름 요소를 사용하지 않습니다. 이 제품은 외륜이 장착된 정밀 연삭 볼(또는 구형 플레인 베어링)로 구성됩니다. 조립체는 분리형과 비분리형으로 나뉩니다. 제외 대상: 플레인 베어링, 로드 엔드 및 플레인 베어링, 구형.
12.0010 inches minimum and 12.0030 inches maximum bore diameter, feat criticality code justification, 2.9980 inches minimum and 3.0030 inches maximum inner member width, qq-a-200/3,t8511 fed spec 1st material response or qq-a-250/29,t851 fed spec 2nd material response outer race member material document and classification, qq-a-200/3,t8511 fed spec 1st material response or qq-a-250/29,t851 fed spec 2nd material response inner member material document and classification
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-173-3763 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 12.0010 inches minimum and 12.0030 inches maximum
- 중요도 코드 정당화
- feat
- 내부 멤버 너비
- 2.9980 inches minimum and 3.0030 inches maximum
- 재료 문서 및 분류
- qq-a-200/3,t8511 fed spec 1st material response or qq-a-250/29,t851 fed spec 2nd material response inner member
- 재료 문서 및 분류
- qq-a-200/3,t8511 fed spec 1st material response or qq-a-250/29,t851 fed spec 2nd material response outer race member
- 재료
- aluminum alloy 2024 or aluminum alloy 2124 inner member
- 재료
- aluminum alloy 2024 or aluminum alloy 2124 outer race member
- 재료
- plastic polytetrafluoroethylene race liner
- 외부 멤버 외부 직경
- 13.6250 inches minimum and 13.6270 inches maximum
- 외부 멤버 너비
- 2.4980 inches minimum and 2.5030 inches maximum
- 특별 기능
- per b-1 engineering
- 스타일 지정자
- with insert and/or liner
- 표면 처리 문서 및 분류
- mil-a-8625,type 2,class 1 mil spec single treatment response outer race member
- 표면 처리 문서 및 분류
- mil-a-8625,type 3 mil spec single treatment response inner member
- 표면 처리
- anodize inner member
- 표면 처리
- anodize outer race member
- 테스트 데이터 문서
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. HT192-101. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-173-3763?
- The FSCG of the NSN 3120-01-173-3763 is 3120
- Does the NSN 3120-01-173-3763 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482300040
- Does NSN 3120-01-173-3763 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3120-01-173-3763 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-173-3763 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-173-3763 was assigned to the Federal Catalog?
- It was assigned 42년 전, on Mon, Mar 5, 1984
가격 및 재고
베어링의 가격 및 재고 정보를 알아보려면 양식을 작성하세요. HT192-101
재고 가용성
이 제품은 다음과 같은 수량과 조건으로 제공됩니다.
| 신규 잉여금 | 1 |
| 총 | 1 |
이 항목의 가용성은 다음 날짜에 마지막으로 업데이트되었습니다.
11/19/2025 06:11 AM EST.
이후 예약 가능 여부가 변경될 수 있습니다. 최신 가격 및 예약 가능 여부를 확인하려면 견적을 요청하세요.