3120-01-175-7017 Self-Aligning Plain Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-01-175-7017.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-01-175-7017. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-175-7017
- 품목 이름 코드
- 13208
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 04/04/1984
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 구름 요소를 사용하지 않습니다. 이 제품은 외륜이 장착된 정밀 연삭 볼(또는 구형 플레인 베어링)로 구성됩니다. 조립체는 분리형과 비분리형으로 나뉩니다. 제외 대상: 플레인 베어링, 로드 엔드 및 플레인 베어링, 구형.
2.2500 inches minimum and 2.2505 inches maximum bore diameter, groove external outer member lubrication feature, 36.0 rockwell c minimum outer race member hardness rating, groove internal inner member lubrication feature, 1.3950 inches minimum and 1.4050 inches maximum inner member width
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-175-7017 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 2.2500 inches minimum and 2.2505 inches maximum
- 경도 등급
- 36.0 rockwell c minimum outer race member
- 내부 멤버 너비
- 1.3950 inches minimum and 1.4050 inches maximum
- 윤활 기능
- groove external outer member
- 윤활 기능
- groove internal inner member
- 윤활 기능
- groove internal outer member
- 재료 문서 및 분류
- ams 5659 assn std single material response and ps 15256,fscm 76301 mfr ref single material response outer race member
- 재료 문서 및 분류
- mil-g-81322 mil spec single material response lubrication
- 재료 문서 및 분류
- qq-c-530,cond at fed spec all material responses inner member
- 재료
- copper alloy 172 or copper alloy 173 inner member
- 재료
- grease lubrication
- 재료
- steel comp xm-12 outer race member
- 외부 멤버 외부 직경
- 3.3990 inches minimum and 3.4010 inches maximum
- 외부 멤버 너비
- 1.1950 inches minimum and 1.2000 inches maximum
- 특별 기능
- three lubrication holes each in inner member and outer member; bearing is delivered by transport dynamics,fscm 09455,to mcdonnell douglas,fscm 76301,with on od of 3.399 in. min and 3.401 in. max thenreworked by mcdonnell douglas to fit oversize housings,lubrication groove is added to outer member at this time; outer member is cadmium plated as necessary
- 정적 반경 하중 정격
- 223000 pounds
- 스타일 지정자
- without insert or liner
- 테스트 데이터 문서
- "76301-ps 21202,cl a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 76301-ps 21201,cl b specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 10M20-156 | Self-Aligning Plain Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-01-175-7017. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-175-7017?
- The FSCG of the NSN 3120-01-175-7017 is 3120
- Does the NSN 3120-01-175-7017 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482300040
- Does NSN 3120-01-175-7017 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-175-7017 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-175-7017 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-175-7017 was assigned to the Federal Catalog?
- It was assigned 42년 전, on Wed, Apr 4, 1984