3120-01-176-2487 Sleeve Bushing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-01-176-2487.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-01-176-2487. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-176-2487
- 품목 이름 코드
- 13206
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 04/10/1984
한쪽 끝에 플랜지가 있거나 없는 나사산이 없는 관 모양의 제품으로, 구멍의 내경을 줄이고 주변 차체 구조를 응력, 변형 및/또는 진동으로 인한 손상으로부터 보호하기 위해 구멍에 삽입되도록 설계되었습니다. 전체 길이는 차체 외경의 25% 또는 차체 주변 평면 사이의 최단 거리보다 길어야 합니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 품목이 포함됩니다. 고무로 제작된 품목은 비금속 부싱을 참조하십시오. 베어링 슬리브, 테이퍼형 부싱, 스페이서 슬리브, 절연체 부싱, 전기 도체 부싱도 참조하십시오. 제외: 부싱, 드릴, 지그.
square center flange outside right corner corner shape, square center flange outside left corner corner shape, round center flange left body corner corner shape, 0.2190 inches minimum and 0.2200 inches maximum body inside diameter, 2 hole antirotation/lubrication type and quantity
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-176-2487 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 회전 방지/윤활 유형 및 수량
- 2 hole
- 본체 내부 직경
- 0.2190 inches minimum and 0.2200 inches maximum
- 모서리 모양
- round center flange left body corner
- 모서리 모양
- square center flange outside left corner
- 모서리 모양
- square center flange outside right corner
- 모서리 모양
- square center flange right body corner
- 모서리 모양
- square outside left corner
- 모서리 모양
- square inside left corner
- 모서리 모양
- square inside right corner
- 모서리 모양
- square outside right corner
- 끝에서 플랜지까지의 거리
- 0.2050 inches minimum and 0.2150 inches maximum
- 플랜지 폭
- 0.2550 inches nominal
- 구멍 직경
- 0.2031 inches minimum and 0.2091 inches maximum first
- 좌측 끝 본체 직경
- 0.3400 inches minimum and 0.3500 inches maximum
- 전체 길이
- 1.2000 inches minimum and 1.2100 inches maximum
- 재료 문서 및 분류
- qq-a-225/9,cond. t7351 fed spec single material response overall
- 재료
- aluminum alloy 7075 overall
- 오른쪽 끝 본체 직경
- 0.7350 inches minimum and 0.7360 inches maximum
- 특별 기능
- right inside surface of body counterbored 0.3290 in. dia,0.4760 in. deep; eight sided,irregularlyshaped flange,1.525 in. o/a height,0.850 in. o/a width
- 표면 마감
- 32.0 microinches internal surfaces
- 표면 홈 위치 및 수량
- 1 external
- 표면 처리 문서 및 분류
- ps 13201,type 2,class 1,fscm 76301 mfr ref 1st treatment response and ps 13208,fscm 76301 mfr ref 2nd treatment response overall
- 표면 처리
- anodize overall
- 테스트 데이터 문서
- 76301-ps21201,class a standard (includes industry or association standards, individual manufactureer standards, etc.).
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 75A430745-2001 | Sleeve Bushing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-01-176-2487. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-176-2487?
- The FSCG of the NSN 3120-01-176-2487 is 3120
- Does the NSN 3120-01-176-2487 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997060
- Does NSN 3120-01-176-2487 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-176-2487 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-176-2487 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-176-2487 was assigned to the Federal Catalog?
- It was assigned 42년 전, on Tue, Apr 10, 1984