3120-01-218-7572 Sleeve Bushing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-01-218-7572.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-01-218-7572. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-218-7572
- 품목 이름 코드
- 13206
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 10/18/1985
한쪽 끝에 플랜지가 있거나 없는 나사산이 없는 관 모양의 제품으로, 구멍의 내경을 줄이고 주변 차체 구조를 응력, 변형 및/또는 진동으로 인한 손상으로부터 보호하기 위해 구멍에 삽입되도록 설계되었습니다. 전체 길이는 차체 외경의 25% 또는 차체 주변 평면 사이의 최단 거리보다 길어야 합니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 품목이 포함됩니다. 고무로 제작된 품목은 비금속 부싱을 참조하십시오. 베어링 슬리브, 테이퍼형 부싱, 스페이서 슬리브, 절연체 부싱, 전기 도체 부싱도 참조하십시오. 제외: 부싱, 드릴, 지그.
0.7084 inches minimum and 0.7087 inches maximum body outside diameter, casehardened features provided, 0.4500 inches minimum and 0.4700 inches maximum body inside diameter, square all corners corner shape, 0.8380 inches minimum and 0.8630 inches maximum flange outside diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-218-7572 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 본체 내부 직경
- 0.4500 inches minimum and 0.4700 inches maximum
- 본체 외경
- 0.7084 inches minimum and 0.7087 inches maximum
- 모서리 모양
- square all corners
- 제공되는 기능
- casehardened
- 플랜지 외경
- 0.8380 inches minimum and 0.8630 inches maximum
- 플랜지 폭
- 0.0950 inches minimum and 0.1050 inches maximum
- 경도 등급
- 58.0 rockwell c minimum and 62.0 rockwell c maximum overall
- 전체 길이
- 1.1480 inches minimum and 1.1680 inches maximum
- 재료 문서 및 분류
- ams6260 assn std single material response overall
- 재료
- steel comp e9310 overall
- 특별 기능
- diameter flange flat one side .348-.355 from center; .031 radius on outside dia surface of body .151 from flange end; also .062 dia thru hole on body outside dia .585 from flange end
- 스타일 지정자
- solid, external flange one end
- 표면 마감
- 8.0 microinches outside diameter surface of body
- 표면 처리
- carbon outside diameter surface of body
- 표면 처리 문서 및 분류
- tt-c-490 type 1 fed spec single treatment response left end surface of body and flange
- 표면 처리 문서 및 분류
- tt-c-490 type 1 fed spec single treatment response outside diameter surface of flange
- 표면 처리 문서 및 분류
- tt-c-490 type 1 fed spec single treatment response right end surface of body
- 표면 처리
- phosphate zinc left end surface of body and flange
- 표면 처리
- phosphate zinc right end surface of body
- 표면 처리
- phosphate zinc outside diameter surface of flange
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 5000426 | Sleeve Bushing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-01-218-7572. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-218-7572?
- The FSCG of the NSN 3120-01-218-7572 is 3120
- Does the NSN 3120-01-218-7572 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997060
- Does NSN 3120-01-218-7572 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-218-7572 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-218-7572 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-218-7572 was assigned to the Federal Catalog?
- It was assigned 40년 전, on Fri, Oct 18, 1985