B12-1681 Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: B12-1681 Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. B12-1681. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- B12-1681
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-260-7268
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 08/04/1987
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
1.3438 inches minimum and 1.4062 inches maximum bore center to shank end distance, 0.2495 inches minimum and 0.2515 inches maximum bore diameter, 60.0 rockwell c minimum inner member hardness rating, 0.4325 inches minimum and 0.4375 inches maximum inner member width, 0.3075 inches minimum and 0.3175 inches maximum inspection hole center to end distance
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-260-7268 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.2495 inches minimum and 0.2515 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 1.3438 inches minimum and 1.4062 inches maximum
- 경도 등급
- 60.0 rockwell c minimum inner member
- 내부 멤버 너비
- 0.4325 inches minimum and 0.4375 inches maximum
- 검사 구멍 중심에서 끝까지 거리
- 0.3075 inches minimum and 0.3175 inches maximum
- 윤활 기능
- groove external inner member
- 전체 길이
- 1.7500 inches minimum and 1.8125 inches maximum
- 재료 문서 및 분류
- ams 6440,uns g52986 assn std single material response inner member
- 재료 문서 및 분류
- astm a108,uns g12144 assn std single material response rod end body
- 재료 문서 및 분류
- qq-b-626,uns c36000 fed spec 1st material response or ams 4550,uns c33200 assn std 2nd material response race insert
- 재료
- copper alloy 360 or copper alloy 332 race insert
- 재료
- steel comp 12l14 rod end body
- 재료
- steel comp e52100 inner member
- 외부 멤버 외부 직경
- 0.8025 inches minimum and 0.8225 inches maximum
- 외부 멤버 너비
- 0.2990 inches minimum and 0.3090 inches maximum
- 렌치 플랫 전체의 섕크 너비
- 0.4588 inches minimum and 0.4788 inches maximum
- 섕크 스타일
- internally threaded w/bead and wrench flats and inspection hole
- 섕크 나사산 길이
- 0.7188 inches minimum and 0.8125 inches maximum
- 정적 반경 하중 정격
- 2948 pounds
- 스타일 지정자
- ball type
- 표면 처리 문서 및 분류
- qq-c-320,class 2 fed spec single treatment response inner member
- 표면 처리 문서 및 분류
- qq-p-416,type 1,class 2 fed spec single treatment response rod end body
- 표면 처리
- cadmium rod end body
- 표면 처리
- chromium inner member
- 스레드 클래스
- 3b
- 나사산 직경
- 0.250 inches nominal
- 나사 방향
- left-hand
- 인치당 실 수량
- 28
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. B12-1681. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-260-7268?
- The FSCG of the NSN 3120-01-260-7268 is 3120
- Does the NSN 3120-01-260-7268 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-260-7268 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-260-7268 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-01-260-7268 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-260-7268 was assigned to the Federal Catalog?
- It was assigned 39년 전, on Tue, Aug 4, 1987