3120PL1602171 Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: 3120PL1602171 Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120PL1602171. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- 3120PL1602171
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-277-5051
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 04/22/1988
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
ams 5630 assn std single material response inner member material document and classification, 2.7400 inches minimum and 2.7600 inches maximum bore center to shank end distance, 3.1410 inches nominal overall length, 0.3700 inches minimum and 0.3750 inches maximum inner member width, 0.2495 inches minimum and 0.2500 inches maximum bore diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-277-5051 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.2495 inches minimum and 0.2500 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 2.7400 inches minimum and 2.7600 inches maximum
- 내부 멤버 너비
- 0.3700 inches minimum and 0.3750 inches maximum
- 전체 길이
- 3.1410 inches nominal
- 재료 문서 및 분류
- ams 5630 assn std single material response inner member
- 재료 문서 및 분류
- ams 5643 assn std 1st material response rod end body
- 재료
- plastic polytetrafluoroethylene race liner
- 재료
- steel comp 440c inner member
- 재료
- steel comp 630 or steel rod end body
- 외부 멤버 외부 직경
- 0.7710 inches minimum and 0.8160 inches maximum
- 외부 멤버 너비
- 0.2760 inches minimum and 0.2810 inches maximum
- 섕크 스타일
- internally threaded
- 섕크 나사산 길이
- 0.9900 inches minimum and 1.0300 inches maximum
- 특별 기능
- keyway on shank
- 정적 반경 하중 정격
- 4270 pounds
- 스타일 지정자
- ball type
- 테스트 데이터 문서
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). or 81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 스레드 클래스
- 3a
- 나사산 직경
- 0.3125 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 24
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120PL1602171. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-277-5051?
- The FSCG of the NSN 3120-01-277-5051 is 3120
- Does the NSN 3120-01-277-5051 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-277-5051 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-277-5051 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-277-5051 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-277-5051 was assigned to the Federal Catalog?
- It was assigned 38년 전, on Fri, Apr 22, 1988