HB3TL110W Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: HB3TL110W Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. HB3TL110W. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- HB3TL110W
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-300-0464
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 05/10/1989
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
36.0 rockwell c minimum and 42.0 rockwell c maximum rod end body hardness rating, 26.0 rockwell c minimum race insert hardness rating, 55.0 rockwell c minimum and 60.0 rockwell c maximum inner member hardness rating, 0.1895 inches minimum and 0.1900 inches maximum bore diameter, 1.3750 inches nominal bore center to shank end distance
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-300-0464 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.1895 inches minimum and 0.1900 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 1.3750 inches nominal
- 경도 등급
- 36.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- 경도 등급
- 55.0 rockwell c minimum and 60.0 rockwell c maximum inner member
- 경도 등급
- 26.0 rockwell c minimum race insert
- 내부 멤버 너비
- 0.4320 inches minimum and 0.4370 inches maximum
- 검사 구멍 중심에서 끝까지 거리
- 0.3120 inches nominal
- 윤활 기능
- self-lubricating liner race liner
- 전체 길이
- 1.7655 inches nominal
- 재료 문서 및 분류
- ams 5630 assn std single material response inner member
- 재료 문서 및 분류
- ams 5643 assn std single material response race insert
- 재료 문서 및 분류
- mil-s-6758 mil spec single material response rod end body
- 재료 문서 및 분류
- nfm,cagec 97613 mfr ref 1st material response or -889,cagec 02758 mfr ref 1st material response race liner
- 재료
- plastic polytetrafluoroethylene and plastic phenolic race liner
- 재료
- steel comp 4130 rod end body
- 재료
- steel comp 440c inner member
- 재료
- steel comp 630 race insert
- 외부 멤버 외부 직경
- 0.7810 inches nominal
- 외부 멤버 너비
- 0.3320 inches minimum and 0.3420 inches maximum
- 렌치 플랫 전체의 섕크 너비
- 0.3750 inches nominal
- 섕크 스타일
- internally threaded w/bead and wrench flats and inspection hole
- 섕크 나사산 길이
- 0.7190 inches minimum and 0.8120 inches maximum
- 특별 기능
- misalignment porm 17 deg
- 정적 반경 하중 정격
- 4900 pounds
- 스타일 지정자
- ball type
- 표면 처리 문서 및 분류
- qq-c-320,class 2 fed spec single treatment response inner member
- 표면 처리 문서 및 분류
- qq-p-416,type 2,class 2 fed spec single treatment response rod end body
- 표면 처리
- cadmium and chromate rod end body
- 표면 처리
- chromium inner member
- 스레드 클래스
- 3b
- 나사산 직경
- 0.2500 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 28
- 나사 시리즈 지정자
- unf
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. HB3TL110W. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-300-0464?
- The FSCG of the NSN 3120-01-300-0464 is 3120
- Does the NSN 3120-01-300-0464 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-300-0464 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-300-0464 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-300-0464 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-300-0464 was assigned to the Federal Catalog?
- It was assigned 37년 전, on Wed, May 10, 1989