3120-01-338-2756 Rod End Plain Bearing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-01-338-2756.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-01-338-2756. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-338-2756
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 04/30/1991
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
28.0 rockwell c minimum and 37.0 rockwell c maximum outer ring hardness rating, 39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body hardness rating, 0.9995 inches minimum and 1.0000 inches maximum bore diameter, 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating, 4.1150 inches minimum and 4.1350 inches maximum bore center to shank end distance
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-338-2756 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 중심에서 섕크 끝까지의 거리
- 4.1150 inches minimum and 4.1350 inches maximum
- 보어 직경
- 0.9995 inches minimum and 1.0000 inches maximum
- 경도 등급
- 39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- 경도 등급
- 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
- 경도 등급
- 28.0 rockwell c minimum and 37.0 rockwell c maximum outer ring
- 내부 멤버 너비
- 1.3730 inches minimum and 1.3750 inches maximum
- 검사 구멍 중심에서 끝까지 거리
- 1.2920 inches minimum and 1.3320 inches maximum
- 전체 길이
- 5.5125 inches nominal
- 재료 문서 및 분류
- ams 5630 assn std single material response inner member
- 재료 문서 및 분류
- ams 5643 assn std single material response race insert
- 재료 문서 및 분류
- mil-s-5000 mil spec single material response rod end body
- 재료
- plastic polytetrafluoroethylene race liner
- 재료
- steel comp 440c inner member
- 재료
- steel comp 630 race insert
- 재료
- steel comp e4340 rod end body
- 외부 멤버 외부 직경
- 2.7650 inches minimum and 2.7850 inches maximum
- 외부 멤버 너비
- 1.0100 inches minimum and 1.0200 inches maximum
- 섕크 나사산 길이
- 2.1250 inches nominal
- 렌치 플랫 전체의 섕크 너비
- 1.7400 inches minimum and 1.7520 inches maximum
- 섕크 스타일
- internally threaded w/hexagon end and inspection hole
- 특별 기능
- keyway in shank; surface finish on ball passivate per mil-s-5002 optional
- 사양/표준 데이터
- 81349-mil-b-81935 government specification
- 정적 반경 하중 정격
- 2360 pounds
- 스타일 지정자
- ball type
- 표면 처리 문서 및 분류
- qq-p-416,type 2,class 2 fed spec single treatment response rod end body
- 표면 처리
- cadmium and chromate rod end body
- 스레드 클래스
- 3b
- 나사산 직경
- 1.250 inches nominal
- 나사 방향
- right-hand
- 인치당 실 수량
- 12
- 나사 시리즈 지정자
- unjf
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| M81935/2-16K | Rod End Plain Bearing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-01-338-2756. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-338-2756?
- The FSCG of the NSN 3120-01-338-2756 is 3120
- Does the NSN 3120-01-338-2756 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-338-2756 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3120-01-338-2756 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-01-338-2756 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-338-2756 was assigned to the Federal Catalog?
- It was assigned 35년 전, on Tue, Apr 30, 1991