M81935/2-3L Rod End Plain Bearing
포괄적인 명세 및 신청 세부사항: M81935/2-3L Rod End Plain Bearing.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. M81935/2-3L. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 부품 번호
- M81935/2-3L
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-342-7760
- 품목 이름 코드
- 13209
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 07/29/1991
저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 전동체를 사용하지 않습니다. 조립체의 외부 부재는 섕크를 형성하도록 변형됩니다. 내부 부재는 플레인 구면 베어링 또는 슬리브 베어링일 수 있습니다. 제외: 플레인 베어링, 구면 베어링 및 플레인 베어링, 자동 조심 베어링.
28.0 rockwell c minimum and 37.0 rockwell c maximum race insert hardness rating, 39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body hardness rating, 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating, 1.3650 inches minimum and 1.3850 inches maximum bore center to shank end distance, 0.1895 inches minimum and 0.1900 inches maximum bore diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-342-7760 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 보어 직경
- 0.1895 inches minimum and 0.1900 inches maximum
- 보어 중심에서 섕크 끝까지의 거리
- 1.3650 inches minimum and 1.3850 inches maximum
- 경도 등급
- 39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- 경도 등급
- 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
- 경도 등급
- 28.0 rockwell c minimum and 37.0 rockwell c maximum race insert
- 내부 멤버 너비
- 0.4350 inches minimum and 0.4370 inches maximum
- 검사 구멍 중심에서 끝까지 거리
- 0.3745 inches nominal
- 전체 길이
- 1.7780 inches nominal
- 재료 문서 및 분류
- ams 5630 assn std single material response inner member
- 재료 문서 및 분류
- ams 5643 assn std single material response race insert
- 재료 문서 및 분류
- mil-s-5000 mil spec single material response rod end body
- 재료
- plastic polytetrafluoroethylene race liner
- 재료
- steel comp 440c inner member
- 재료
- steel comp 630 race insert
- 재료
- steel comp e4340 rod end body
- 외부 멤버 외부 직경
- 0.7960 inches minimum and 0.8160 inches maximum
- 외부 멤버 너비
- 0.3320 inches minimum and 0.3420 inches maximum
- 렌치 플랫 전체의 섕크 너비
- 0.4270 inches minimum and 0.4390 inches maximum
- 섕크 스타일
- internally threaded w/hexagon end and inspection hole
- 섕크 나사산 길이
- 0.7500 inches minimum
- 정적 반경 하중 정격
- 2360 pounds
- 스타일 지정자
- ball type
- 표면 처리 문서 및 분류
- qq-p-416,cl 2 fed spec all treatment responses rod end body
- 표면 처리
- cadmium and chromate rod end body
- 스레드 클래스
- 3b
- 나사산 직경
- 0.312 inches nominal
- 나사 방향
- left-hand
- 인치당 실 수량
- 24
- 나사 시리즈 지정자
- unjf
대체합니다
The NSN 3120-01-342-7760 is used in place of the following discontinued or alternate items:
| NSN | 이름 | 날짜 |
|---|---|---|
| 3120-01-047-8021 | No Name Available | 11/24/2003 |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. M81935/2-3L. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-342-7760?
- The FSCG of the NSN 3120-01-342-7760 is 3120
- Does the NSN 3120-01-342-7760 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-342-7760 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-342-7760 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-342-7760 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-342-7760 was assigned to the Federal Catalog?
- It was assigned 35년 전, on Mon, Jul 29, 1991