3120-01-560-5620 Sleeve Bushing
NSN에 대한 포괄적인 사양 및 애플리케이션 세부 정보: 3120-01-560-5620.
요약
베어링에 대한 자세한 요약 정보를 살펴보세요. 3120-01-560-5620. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.
- 연방 공급 분류
- 3120 미장착 플레인 베어링
- (NSN) 국가 재고 번호
- 3120-01-560-5620
- 품목 이름 코드
- 13206
- 연방 품목 식별 가이드
- A045A0
- 배정 날짜
- 02/04/2008
한쪽 끝에 플랜지가 있거나 없는 나사산이 없는 관 모양의 제품으로, 구멍의 내경을 줄이고 주변 차체 구조를 응력, 변형 및/또는 진동으로 인한 손상으로부터 보호하기 위해 구멍에 삽입되도록 설계되었습니다. 전체 길이는 차체 외경의 25% 또는 차체 주변 평면 사이의 최단 거리보다 길어야 합니다. 베어링 원주각이 180도(3.141라디안) 이하인 두 개 이상의 세그먼트로 나뉜 품목이 포함됩니다. 고무로 제작된 품목은 비금속 부싱을 참조하십시오. 베어링 슬리브, 테이퍼형 부싱, 스페이서 슬리브, 절연체 부싱, 전기 도체 부싱도 참조하십시오. 제외: 부싱, 드릴, 지그.
chamfered inside left corner corner shape, 5.5600 inches nominal body inside diameter, chamfered outside right corner corner shape, c-135 aircraft end item identification, 6.3422 inches minimum and 6.3440 inches maximum body outside diameter
데이터시트
베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-560-5620 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.
- 최종 품목 식별
- c-135 aircraft
- 본체 내부 직경
- 5.5600 inches nominal
- 본체 외경
- 6.3422 inches minimum and 6.3440 inches maximum
- 모서리 모양
- chamfered outside right corner
- 모서리 모양
- chamfered inside left corner
- 모서리 모양
- chamfered inside right corner
- 모서리 모양
- round left flange body corner
- 모서리 모양
- square left flange outside right corner
- 모서리 모양
- square outside left corner
- 플랜지 외경
- 7.2500 inches nominal
- 플랜지 폭
- 0.1650 inches minimum and 0.1750 inches maximum
- 전체 길이
- 1.0800 inches nominal
- 통제 기관에서 할당한 부품 이름
- bushing - main landing gear, fwd trunnion
- 재료 문서 및 분류
- mil-b-6946 cold drawn mil spec single material response or qq-b-671. class 3 fed spec single material response overall
- 재료
- copper alloy 630 or copper alloy 954 overall
- 스타일 지정자
- solid, external flange one end
- 표면 처리 문서 및 분류
- ams-qq-pp-416 type ii, class 3(preferred) assn std single treatment response or ams 2417, type 1 or type 2 assn std single treatment response or ams 2451/4 or 3 assn std single treatment response or ams 2451/9 type 1 or type 2 assn std single treatment response left end surface of body and flange
- 표면 처리 문서 및 분류
- ams-qq-pp-416, type ii, class 3(preferred) assn std single treatment response or ams 2417 type 1 or type 2 assn std single treatment response or ams 2451/4 or 3 assn std single treatment response or ams 2451/9 type 1 or type 2 assn std single treatment response right end surface of body
- 표면 처리 문서 및 분류
- ams-qq-pp-416, type ii, class 3(preferred) assn std single treatment response or ams 2417 type 1 or type 2 assn std single treatment response or ams 2451/4 or 3 assn std single treatment response or ams 2451/9 type 1 or type 2 assn std single treatment response outside diameter surface of body
- 표면 처리
- cadmium or nickel and zinc right end surface of body
- 표면 처리
- cadmium or nickel and zinc left end surface of body and flange
- 표면 처리
- cadmium or nickel and zinc outside diameter surface of body
관련 베어링
이 NSN과 관련된 다양한 베어링 모델을 살펴보십시오. 아래 베어링을 클릭하면 자세한 기술 데이터, 성능 등급 및 적용 지침을 볼 수 있습니다.
| 부품 번호 | 이름 |
|---|---|
| 9-61961-3 | Sleeve Bushing |
자주 묻는 질문
베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. 3120-01-560-5620. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.
- What is the FSCG of the NSN 3120-01-560-5620?
- The FSCG of the NSN 3120-01-560-5620 is 3120
- Does the NSN 3120-01-560-5620 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997060
- Does NSN 3120-01-560-5620 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-560-5620 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-560-5620 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-560-5620 was assigned to the Federal Catalog?
- It was assigned 18년 전, on Mon, Feb 4, 2008