What is the FSCG of the NSN 3120-01-707-2184?

The FSCG of the NSN 3120-01-707-2184 is 3120

Does the NSN 3120-01-707-2184 have a Schedule B code assigned?

Yes, the Schedule B code is 8482300040

Does NSN 3120-01-707-2184 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-707-2184 contain precious materials?

Item does not contain precious metal.

Does NSN 3120-01-707-2184 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3120-01-707-2184 was assigned to the Federal Catalog?

It was assigned 2년 전, on Mon, Jan 23, 2023

MS14101-14P | Aerospace-Bearing

요약

베어링에 대한 자세한 요약 정보를 살펴보세요. MS14101-14P. 소싱, 규정 준수 및 정확한 부품 추적을 지원하기 위해 NSN, 분류 그룹 및 식별 코드가 포함되어 있습니다.

부품 번호: MS14101-14P
연방 공급 분류: 3120 미장착 플레인 베어링
(NSN) 국가 재고 번호: 3120-01-707-2184
품목 이름 코드: 13208
연방 품목 식별 가이드: A045A0
배정 날짜: 01/23/2023

저널, 거전, 피벗 등이 움직이는 분리형 조립체입니다. 하중을 지지하고 미끄럼 마찰을 줄이는 데 사용됩니다. 구름 요소를 사용하지 않습니다. 이 제품은 외륜이 장착된 정밀 연삭 볼(또는 구형 플레인 베어링)로 구성됩니다. 조립체는 분리형과 비분리형으로 나뉩니다. 제외 대상: 플레인 베어링, 로드 엔드 및 플레인 베어링, 구형.

55.0 rockwell c minimum and 62.0 rockwell c maximum inner member hardness rating, 28.0 rockwell c minimum and 37.0 rockwell c maximum outer race member hardness rating, self-lubricating liner race liner lubrication feature, 0.873 inches minimum and 0.875 inches maximum inner member width, 0.8745 inches minimum and 0.8750 inches maximum bore diameter

데이터시트

베어링에 대한 포괄적인 기술 사양은 다음과 같습니다. 3120-01-707-2184 . 치수, 재료, 허용오차, 성능 특성 등을 찾아보세요.

보어 직경: 0.8745 inches minimum and 0.8750 inches maximum
경도 등급: 55.0 rockwell c minimum and 62.0 rockwell c maximum inner member
경도 등급: 28.0 rockwell c minimum and 37.0 rockwell c maximum outer race member
내부 멤버 너비: 0.873 inches minimum and 0.875 inches maximum
윤활 기능: self-lubricating liner race liner
통제 기관에서 할당한 부품 이름: bearing, plain, self-lubricating, self-aligning, low speed, narrow, grooved race, - 65 to + 325 f
재료 문서 및 분류: ams5630 international std/spec all material responses or ams5880 international std/spec all material responses or ams5618 international std/spec all material responses inner member
재료 문서 및 분류: ams5643 international std/spec all material responses outer race member
재료: plastic polytetrafluoroethylene race liner
재료: steel comp 440c inner member
재료: steel corrosion resisting outer race member
외부 멤버 외부 직경: 1.5620 inches minimum and 1.5625 inches maximum
외부 멤버 너비: 0.698 inches minimum and 0.708 inches maximum
특별 기능: absence of letter c indicates 440c ball material. absence of letter a = tested to 25000 cycles. p = zinc-nickel or cadmium plating. material - ball: 440c (ams5630, ams5880, or ams5618). race: 17-4ph cres per ams5643. liner: ptfe shall be included in the liner. harness rating is before swaging. finish: race: plating, when specified, shall be zinc-nickel plating per ams2417, type 2, grade b or cadmium plating per ams-qq-p-416, type ii, class 2. plating shall be on the outside diameter surface and on the flats between the outside diameter and the v-grooves. the plating runout shall occur either in the v-grooves or on the side face areas between the v-grooves and the ball. ball: passivate per ams2700, method 1 (nitric acid) or method 2 (citric acid), or astm a967. citric 1, citric 2, and citric 3 are acceptable. (ams2700, method 1, type 8 is prohibited on bearings manufactured with 440c after june 1, 2018).
정적 반경 하중 정격: 62200 pounds
스타일 지정자: with insert and/or liner with staking groove
표면 처리 문서 및 분류: ams2417, type 2, grade b international std/spec all treatment responses or ams-qq-p-416, type ii, class 2 international std/spec all treatment responses inner member
표면 처리 문서 및 분류: ams2700, method 1 (nitric acid) or method 2 (citric acid) international std/spec all treatment responses or astm a967. citric 1, citric 2, and citric 3 international std/spec all treatment responses outer race member
표면 처리: cadmium or zinc and nickel alloy inner member
표면 처리: passivate outer race member

자주 묻는 질문

베어링에 대한 일반적인 질문에 대한 빠른 답변을 찾아보세요. MS14101-14P. 기술 사양, 설치 팁, 유지 관리 지침, 규정 요구 사항 및 문제 해결 조언을 살펴보세요.

What is the FSCG of the NSN 3120-01-707-2184?: The FSCG of the NSN 3120-01-707-2184 is 3120

Does the NSN 3120-01-707-2184 have a Schedule B code assigned?: Yes, the Schedule B code is 8482300040

Does NSN 3120-01-707-2184 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3120-01-707-2184 contain precious materials?: Item does not contain precious metal.

Does NSN 3120-01-707-2184 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.